Seatbelt Test Dummy ECE R16
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The ECE R16 crash test dummy is a professional anthropomorphic test device representing a 50th percentile adult male. You can use it for dynamic seatbelt testing, vehicle restraint system evaluation, and occupant injury analysis. Its design accurately reflects human mass distribution and body dimensions, making it compatible with test sleds, vehicle seats, and other restraint system loading devices. The dummy complies with GB 14166-2013 and ECE R16, enabling regulatory and certification testing.
Application
You can use this dummy in a variety of scenarios:
(1) Dynamic performance testing of automotive seatbelts;
(2) Vehicle seat restraint system development and validation;
(3) Front-impact crash simulation experiments;
(4) Optimization of seatbelt design and evaluation of occupant injury risk;
(5) Regulatory compliance testing according to GB 14166-2013 and ECE R16;
(6) High-repetition crash research and laboratory experiments;
(7) Supporting automotive safety certification and seatbelt R&D projects.
Standards
You can conduct tests using this dummy in accordance with the following standards:
(1) GB 14166-2013 — Motor Vehicle Occupant Restraint System Crash Test Dummy;
(2) ECE R16 — Uniform Provisions Concerning the Approval of Vehicles with Regard to Safety Belts;
(3) ISO 15830 — Road Vehicles — Side Impact Dummies for Restraint System Assessment;
(4) Additional applicable regional or NCAP requirements for safety belt testing.
Parameters
Body Dimensions
| No. | Parameter | Dimension (mm) |
|---|---|---|
| 1 | Head Width | 160 ± 5 |
| 2 | Shoulder Width | 465 ± 5 |
| 3 | Trunk Width at Hip | 120 ± 5 |
| 4 | Hip Width | 340 ± 5 |
| 5 | Knee Center to Foot Height | 510 ± 10 |
| 6 | Hip Center to Foot Height | 990 ± 10 |
| 7 | Upper Trunk Plane to Foot Height | 1470 ± 10 |
| 8 | Head Bolt Center to Foot Height | 1600 ± 10 |
| 9 | Head Top to Foot Height | 1750 ± 10 |
| 10 | T-Point Height | 720 ± 5 |
| 11 | P-Point Height | 320 ± 5 |
Mass Distribution
| No. | Component | Mass (kg) |
|---|---|---|
| 1 | Head Assembly | 4.0 ± 0.2 |
| 2 | Neck Assembly | 0.7 ± 0.1 |
| 3 | Torso Assembly | 29.7 ± 1.0 |
| 4 | Thigh Assembly (L/R) | 12.3 ± 0.3 |
| 5 | Lower Leg Assembly | 8.4 ± 0.3 |
| 6 | Hip Joint | 3.1 ± 0.1 |
| 7 | Knee Assembly | 1.1 ± 0.1 |
| 8 | Outer Cover + Chest Pad | 1.1 ± 0.1 |
| 9 | Total Weight (with calibration mass) | 75.5 ± 1.0 |
Sensor Configuration
| Location | Sensor Type | Channel |
|---|---|---|
| Chest | Wire Pull Displacement Sensor | 1 |
| Pelvis | Wire Pull Displacement Sensor | 2 |
Send product request
Other supplier products
 |
ink abrasion tester / Ink Abrasion Resistance Tester Ink Rub Tester | Ink abrasion testerPrinciple: To be ground layer and Friction Paper of the Ink Abrasion tester samples, under the action of the load friction body... |
 |
Rain Tester | Getaquote: Whats/App: +86 181 0160 0864 This instrument simulates rain sprayed horizontally onto a fabric sample vertically fixed in a stainless ... |
 |
High Temperature Half Thermal Manikin | Product Introduction: This head and torso is designed for testing clothing and headgear in high temperature environments. The head and torso are ... |
 |
Wyzenbeek or Oscillatory Abrasion Tester | Get a quote： Whats/App: +86 181 0160 0864 Wyzenbeek wear resistance tester, also known as Oscillatory wear resistance tester, is used to test the... |
 |
Vacuum Cleaner Filtration Test System | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Vacuum Cleaner Filters for emission characterisation of vacuum cleaners (EN 60312)... |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
