Seatbelt Test Dummy ECE R16
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The ECE R16 crash test dummy is a professional anthropomorphic test device representing a 50th percentile adult male. You can use it for dynamic seatbelt testing, vehicle restraint system evaluation, and occupant injury analysis. Its design accurately reflects human mass distribution and body dimensions, making it compatible with test sleds, vehicle seats, and other restraint system loading devices. The dummy complies with GB 14166-2013 and ECE R16, enabling regulatory and certification testing.
Application
You can use this dummy in a variety of scenarios:
(1) Dynamic performance testing of automotive seatbelts;
(2) Vehicle seat restraint system development and validation;
(3) Front-impact crash simulation experiments;
(4) Optimization of seatbelt design and evaluation of occupant injury risk;
(5) Regulatory compliance testing according to GB 14166-2013 and ECE R16;
(6) High-repetition crash research and laboratory experiments;
(7) Supporting automotive safety certification and seatbelt R&D projects.
Standards
You can conduct tests using this dummy in accordance with the following standards:
(1) GB 14166-2013 — Motor Vehicle Occupant Restraint System Crash Test Dummy;
(2) ECE R16 — Uniform Provisions Concerning the Approval of Vehicles with Regard to Safety Belts;
(3) ISO 15830 — Road Vehicles — Side Impact Dummies for Restraint System Assessment;
(4) Additional applicable regional or NCAP requirements for safety belt testing.
Parameters
Body Dimensions
| No. | Parameter | Dimension (mm) |
|---|---|---|
| 1 | Head Width | 160 ± 5 |
| 2 | Shoulder Width | 465 ± 5 |
| 3 | Trunk Width at Hip | 120 ± 5 |
| 4 | Hip Width | 340 ± 5 |
| 5 | Knee Center to Foot Height | 510 ± 10 |
| 6 | Hip Center to Foot Height | 990 ± 10 |
| 7 | Upper Trunk Plane to Foot Height | 1470 ± 10 |
| 8 | Head Bolt Center to Foot Height | 1600 ± 10 |
| 9 | Head Top to Foot Height | 1750 ± 10 |
| 10 | T-Point Height | 720 ± 5 |
| 11 | P-Point Height | 320 ± 5 |
Mass Distribution
| No. | Component | Mass (kg) |
|---|---|---|
| 1 | Head Assembly | 4.0 ± 0.2 |
| 2 | Neck Assembly | 0.7 ± 0.1 |
| 3 | Torso Assembly | 29.7 ± 1.0 |
| 4 | Thigh Assembly (L/R) | 12.3 ± 0.3 |
| 5 | Lower Leg Assembly | 8.4 ± 0.3 |
| 6 | Hip Joint | 3.1 ± 0.1 |
| 7 | Knee Assembly | 1.1 ± 0.1 |
| 8 | Outer Cover + Chest Pad | 1.1 ± 0.1 |
| 9 | Total Weight (with calibration mass) | 75.5 ± 1.0 |
Sensor Configuration
| Location | Sensor Type | Channel |
|---|---|---|
| Chest | Wire Pull Displacement Sensor | 1 |
| Pelvis | Wire Pull Displacement Sensor | 2 |
在线联系供应商
Other supplier products
 |
Burning Manikin System | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The burning manikin system is used to test the overall thermal protection performa... |
 |
Qinsun 440 | Standard The Qinsun 440 is engineered to meet stringent international testing standards, including ASTM G155, ISO 105 B02, SAE J2412, and IEC 68... |
 |
Xenon Arc Weatherometer | IntroductionThe xenon arc lamp, which is capable of simulating the whole natural sunlight spectrum in the most consistent manner, can reproduce the... |
 |
Fabric Fiber Shedding Degree Tester (Friction) | Get a quote： Whats/App: +86 181 0160 0864 The Fabric Fiber Shedding Degree Tester (Friction) is an instrument used to evaluate the light-blocking... |
 |
Adhesion Strength Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Adhesion Strength Tester is a precision instrument designed to evaluate peelin... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | 卖方: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | 卖方: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | 卖方: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | 卖方: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | 卖方: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
