Multi-Purpose Friction and Wear Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Multi-Purpose Friction and Wear Tester is a laboratory testing system designed to evaluate friction behavior and wear performance of engineering materials under controlled contact, load, speed, and temperature conditions. You can use this instrument to conduct standardized and comparative tribological testing by simulating rolling, sliding, and mixed lubrication conditions commonly encountered in industrial applications.
Application
You can apply this tester in the following testing scenarios and product evaluations:
Bearing and transmission components: rolling bearings, sliding bearings, gear elements, and rollers
Mechanical parts: shafts, seals, valves, cams, bushings, and cylindrical components
Material research: metals, polymers, elastomers, ceramics, and composite materials
Lubricant evaluation: oils and greases under controlled temperature and load conditions
Surface engineering studies: coatings, heat-treated surfaces, and surface-modified materials
Academic and industrial laboratories: tribology research, teaching experiments, and method validation
Quality control and process optimization: material comparison, wear resistance verification, and durability assessment
Standards
GB/T 3960 — Method for Friction Testing of Metals
GB/T 3961 — Method for Wear Performance Testing of Materials
ASTM G77 — Block-on-Ring Wear Testing Method
ASTM G99 — Ball-on-Disk Wear Testing Method
ISO 7148-2 — Plain Bearings and Lubrication Friction Testing
DIN 50324 — Standard Methods for Friction and Wear Testing
Parameters
| Item | Specification |
|---|---|
| Contact geometry | Crossed cylinder / Ball-on-cylinder / Block-on-ring / Double roller |
| Center distance | 60 mm |
| Roller diameter | 60 mm |
| Sliding specimen | 12.7 mm ball, roller, or block |
| Speed range | 30 – 850 rpm |
| Maximum sliding speed | 4.7 m/s |
| Slip ratio settings | 0.00%, 3.33%, 5.00%, 10.00%, 15.00%, 20.00% |
| Maximum friction force | 130 N |
| Friction force measurement | Strain gauge sensor |
| Load range | 50 – 750 N |
| Load actuator | Pneumatic cylinder |
| Load control | Precision pressure regulator |
| Load measurement | Pressure sensor |
| Test chamber temperature | Ambient to 150 °C |
| Heating power | 150 W |
| Temperature sensor | Type K thermocouple |
| Motor | Brushless DC servo motor, 200 W |
| Control mode | Speed, temperature, and test duration automatic; load manual |
| Measured parameters | Speed, load, friction force, temperature, revolutions, time, sliding distance, friction coefficient |
| Software interface | USB communication module |
| Power supply | 220/240 V, single phase, 50 Hz, 1.2 kW or 110/120 V, single phase, 60 Hz, 1.2 kW |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
50th Percentile Male Crash Test Dummy (Standing) | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The 50th Percentile Male Crash Test Dummy (Standing) is a biomechanical surrogate ... |
 |
Flexible Container Integrity Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Flexible Container Integrity Tester is an automated instrument designed to eva... |
 |
Nissan Scratch Tester | Get a quote： Whats/App: +86 181 0160 0864 The Scratch Tester is designed to evaluate the scratch resistance of materials such as automotive inter... |
 |
Photovoltaic module backplane peeling strength testing machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Photovoltaic Module Backplane Peeling Strength Testing Machine is a specialize... |
 |
Minimum Ignition Temperature (MIT) – Dust Cloud Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Dust Cloud Minimum Ignition Temperature Tester is mainly used to assess the explos... |
Похожие товары
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | Продавец: 868255 | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | Продавец: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
