Multi-Purpose Friction and Wear Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Multi-Purpose Friction and Wear Tester is a laboratory testing system designed to evaluate friction behavior and wear performance of engineering materials under controlled contact, load, speed, and temperature conditions. You can use this instrument to conduct standardized and comparative tribological testing by simulating rolling, sliding, and mixed lubrication conditions commonly encountered in industrial applications.
Application
You can apply this tester in the following testing scenarios and product evaluations:
Bearing and transmission components: rolling bearings, sliding bearings, gear elements, and rollers
Mechanical parts: shafts, seals, valves, cams, bushings, and cylindrical components
Material research: metals, polymers, elastomers, ceramics, and composite materials
Lubricant evaluation: oils and greases under controlled temperature and load conditions
Surface engineering studies: coatings, heat-treated surfaces, and surface-modified materials
Academic and industrial laboratories: tribology research, teaching experiments, and method validation
Quality control and process optimization: material comparison, wear resistance verification, and durability assessment
Standards
GB/T 3960 — Method for Friction Testing of Metals
GB/T 3961 — Method for Wear Performance Testing of Materials
ASTM G77 — Block-on-Ring Wear Testing Method
ASTM G99 — Ball-on-Disk Wear Testing Method
ISO 7148-2 — Plain Bearings and Lubrication Friction Testing
DIN 50324 — Standard Methods for Friction and Wear Testing
Parameters
| Item | Specification |
|---|---|
| Contact geometry | Crossed cylinder / Ball-on-cylinder / Block-on-ring / Double roller |
| Center distance | 60 mm |
| Roller diameter | 60 mm |
| Sliding specimen | 12.7 mm ball, roller, or block |
| Speed range | 30 – 850 rpm |
| Maximum sliding speed | 4.7 m/s |
| Slip ratio settings | 0.00%, 3.33%, 5.00%, 10.00%, 15.00%, 20.00% |
| Maximum friction force | 130 N |
| Friction force measurement | Strain gauge sensor |
| Load range | 50 – 750 N |
| Load actuator | Pneumatic cylinder |
| Load control | Precision pressure regulator |
| Load measurement | Pressure sensor |
| Test chamber temperature | Ambient to 150 °C |
| Heating power | 150 W |
| Temperature sensor | Type K thermocouple |
| Motor | Brushless DC servo motor, 200 W |
| Control mode | Speed, temperature, and test duration automatic; load manual |
| Measured parameters | Speed, load, friction force, temperature, revolutions, time, sliding distance, friction coefficient |
| Software interface | USB communication module |
| Power supply | 220/240 V, single phase, 50 Hz, 1.2 kW or 110/120 V, single phase, 60 Hz, 1.2 kW |
Send product request
Other supplier products
 |
Total Knee Prosthesis Wear Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Total Knee Prosthesis Wear Testing Machine is a specialized testing device des... |
 |
Safety Helmet Roll-off Testing Equipment | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The safety helmet retention test equipment is a device used to evaluate the stabil... |
 |
Constant elongation stress meter | Tensile Testing Machines | Standard constant tensile stress meter conforms to the standard GB/T 21461.2-2008 Plastic ultra-high molecular weight polyethylene (PE-UHMW) moldi... |
 |
100-V2 steam generator tester | Meet the standard: The 100-V2 steam generator meets the requirements of Ford FLTM BI 107-05. GMW15919 and FCA LP-463PB-64-01 thermal shock test sp... |
 |
Geomembrane Environmental Stress Cracking Resistance Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk In the field of materials science and engineering, environmental stress cracking t... |
Same products
 |
Laser Cutting Machines | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
