Multi-Purpose Friction and Wear Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Multi-Purpose Friction and Wear Tester is a laboratory testing system designed to evaluate friction behavior and wear performance of engineering materials under controlled contact, load, speed, and temperature conditions. You can use this instrument to conduct standardized and comparative tribological testing by simulating rolling, sliding, and mixed lubrication conditions commonly encountered in industrial applications.
Application
You can apply this tester in the following testing scenarios and product evaluations:
Bearing and transmission components: rolling bearings, sliding bearings, gear elements, and rollers
Mechanical parts: shafts, seals, valves, cams, bushings, and cylindrical components
Material research: metals, polymers, elastomers, ceramics, and composite materials
Lubricant evaluation: oils and greases under controlled temperature and load conditions
Surface engineering studies: coatings, heat-treated surfaces, and surface-modified materials
Academic and industrial laboratories: tribology research, teaching experiments, and method validation
Quality control and process optimization: material comparison, wear resistance verification, and durability assessment
Standards
GB/T 3960 — Method for Friction Testing of Metals
GB/T 3961 — Method for Wear Performance Testing of Materials
ASTM G77 — Block-on-Ring Wear Testing Method
ASTM G99 — Ball-on-Disk Wear Testing Method
ISO 7148-2 — Plain Bearings and Lubrication Friction Testing
DIN 50324 — Standard Methods for Friction and Wear Testing
Parameters
| Item | Specification |
|---|---|
| Contact geometry | Crossed cylinder / Ball-on-cylinder / Block-on-ring / Double roller |
| Center distance | 60 mm |
| Roller diameter | 60 mm |
| Sliding specimen | 12.7 mm ball, roller, or block |
| Speed range | 30 – 850 rpm |
| Maximum sliding speed | 4.7 m/s |
| Slip ratio settings | 0.00%, 3.33%, 5.00%, 10.00%, 15.00%, 20.00% |
| Maximum friction force | 130 N |
| Friction force measurement | Strain gauge sensor |
| Load range | 50 – 750 N |
| Load actuator | Pneumatic cylinder |
| Load control | Precision pressure regulator |
| Load measurement | Pressure sensor |
| Test chamber temperature | Ambient to 150 °C |
| Heating power | 150 W |
| Temperature sensor | Type K thermocouple |
| Motor | Brushless DC servo motor, 200 W |
| Control mode | Speed, temperature, and test duration automatic; load manual |
| Measured parameters | Speed, load, friction force, temperature, revolutions, time, sliding distance, friction coefficient |
| Software interface | USB communication module |
| Power supply | 220/240 V, single phase, 50 Hz, 1.2 kW or 110/120 V, single phase, 60 Hz, 1.2 kW |
在线联系供应商
Other supplier products
 |
Torque Rheometers | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Torque rheometer is ideal for studying polymer flow, deformation, plasticization, ... |
 |
Bubble Leak Tester YY/T 0681.5 | Standards YY/T 0681.5 - 2010. etc. Main Uses Medical Device Packaging Inspection: The Gross Leak Tester can be used for the sealing performance ... |
 |
Scratch Resistance Test machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Scratch Resistance Test Machine is a precision testing instrument designed to ... |
 |
Falling Sand Abrasion Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The falling sand abrasion tester is used to test the abrasion resistance of coatin... |
 |
Geosynthetics Horizontal Penetration Tester丨Geotextile Test Machine | Scope of application: Used to determine the horizontal permeability of geosynthetics under constant head flow conditions. Under the conditions of ... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | 卖方: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | 卖方: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | 卖方: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | 卖方: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | 卖方: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
