Single Cable Vertical Flame Tester Manufacturer | IEC 60332-1-2 Cable Flammability Test Equipment Supplier

• 

Get a quote：

Whats/App: +86 156 1874 6768

Web: standard-groups.com

E-mail：info@standard-groups。com

Parameter

Test Procedures

Prepare the cable to be tested and plug in the power cord, then turn on the power switch.

1.Secure the product to the fixed crossbar, adjust the height of the marking ruler, place the filter paper under the burning product, and turn on the gas (or propane gas) and compressed air. Set the burning time to the required number of seconds according to the cable diameter and standard settings. Tap the touchscreen to ignite, adjust the gas flow meter and air flow meter, and use the gauge to adjust the flame height: blue flame 50-60mm, outer flame 170-190mm.

2. Determine the number of burns required. Set the counter to 1 for one burn cycle. The cycle will automatically stop after completion. For two burns, set the counter to 2. Press the black dot next to the counter to reset. The burning cycle will continue until the set number of times is reached and then automatically stop. Adjust the position of the Bunsen burner to ensure it is burning the product. Press the touchscreen to start the test or press the foot switch (automatic ignition). The burning time starts counting. When the burning time is complete, the Bunsen burner automatically extinguishes and the afterglow time begins. The test is complete after the afterglow time.

3. After the test, check the condition of the product.

4. Finally, press the exhaust button to vent the test exhaust gas outside.

Другие товары поставщика

	Curtain Combustion Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Curtain Combustion Tester is designed to evaluate the flame resistance of textiles and ...
	Battery Powder resistivity meter丨Battery Powder resistivity Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards YS/T 587.6-2006 GB/T 24525-2009 GBT 30835-2014 Product Advantages Unmatche...
	Flooring Materials Abrasion Resistance Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Flooring Materials Abrasion Resistance Tester is designed to evaluate the wear resistan...
	Aluminum Ointment Tube Toughness Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The main purpose of the ductility tester for aluminum tubes is to evaluate th...
	Dry microbial penetration resistance tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com DryMicrobial Penetration Resistance Testeris designed to determine determine the penetratio...

Похожие товары

	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...
	PanEVAP & MVR system	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...