Single Cable Vertical Flame Tester Manufacturer | IEC 60332-1-2 Cable Flammability Test Equipment Supplier
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Parameter
| Description | Details |
|---|---|
| Combustion Angle | 0°-45° |
| Power | 50W, 500W, 1000W |
| Flame Application Time | 0——999.9S |
| Flame Height | 20±1mm, 40±2mm, 50——60mm |
| Temperature Measurement Distance | 10±1mm, 55±1mm, 95mm (assuming the last value should have a unit, here added "mm" for consistency) |
Test Procedures
Prepare the cable to be tested and plug in the power cord, then turn on the power switch.
1.Secure the product to the fixed crossbar, adjust the height of the marking ruler, place the filter paper under the burning product, and turn on the gas (or propane gas) and compressed air. Set the burning time to the required number of seconds according to the cable diameter and standard settings. Tap the touchscreen to ignite, adjust the gas flow meter and air flow meter, and use the gauge to adjust the flame height: blue flame 50-60mm, outer flame 170-190mm.
2. Determine the number of burns required. Set the counter to 1 for one burn cycle. The cycle will automatically stop after completion. For two burns, set the counter to 2. Press the black dot next to the counter to reset. The burning cycle will continue until the set number of times is reached and then automatically stop. Adjust the position of the Bunsen burner to ensure it is burning the product. Press the touchscreen to start the test or press the foot switch (automatic ignition). The burning time starts counting. When the burning time is complete, the Bunsen burner automatically extinguishes and the afterglow time begins. The test is complete after the afterglow time.
3. After the test, check the condition of the product.
4. Finally, press the exhaust button to vent the test exhaust gas outside.
在线联系供应商
Other supplier products
 |
Geomembrane Fracture Resistance Test device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D7176(Standard Test Method for Determining the Resistance of Geomembranes ... |
 |
Guide pin anchoring force tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Guide Pin Anchoring Force Tester is designed to evaluate the anchoring performance of m... |
 |
Helmet Xenon Aging Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The helmet xenon lamp aging tester is a device that simulates the damage caused by long-ter... |
 |
Cut Susceptibility Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements f... |
 |
High-Precision ISO 16890 Filter Media Test Rig for R&D and QC | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system can execute and complies with: (1) ISO 16890 – Air filter clas... |
Same products
 |
不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝 | 卖方: 863048 | 产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1，FCAW不锈钢焊丝，AWS A5.22药芯焊丝，304不锈钢焊接耗材，低碳不锈钢药芯焊丝，耐高温不锈钢焊丝，... |
 |
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点 | 卖方: 863048 | 迅卓不锈钢药心焊丝 E317LT1-1 分类： Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | 卖方: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | 卖方: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
 |
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner | 卖方: Beijing JCZ Technology Co., Ltd | The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las... |
