Eddy Current Testing Equipment
Eddy current testing of welds is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. At the same time, we need to be clear that the welded pipe is, in general, the steel pipe that we usually say, which is a welded steel pipe.
Eddy current weld testingis a non-destructive testing technique for detecting component defects by using the principle that the eddy current induced by the AC electromagnetic coil on the surface of the metal member encounters a defect. The oscillating current is generated in the conductive member by the excitation coil by the principle of electromagnetic induction, and the amount of change in the eddy current is measured by the detecting coil, thereby obtaining information on the component defect.
Eddy current testing is a non-destructive testing technique in which an alternating current electromagnetic coil induces eddy currents on the surface of a metal member. It is suitable for the detection of defects in conductive materials, including ferromagnetic and non-ferromagnetic metal materials.
BKNET-01 2 NDT weld testing equipment is used for on-line and off-line inspection of welded pipes. It has high sensitively to axial defects such as unwelded welding, dark spots and open cracks. In the production process, products are caused by welder failure. Slow and long-term injuries can be reliably detected.
BKNET-0102 Welded Pipe Eddy Current Flaw Detector performance
|
Detection channel |
Double channel |
|
Detection speed |
1～500m/min(online) |
|
Frequency range |
100Hz-1MHz |
|
Gain |
0～99dB，step0.1dB |
|
Phase rotation |
0-360°step1° |
|
High pass |
|
|
Low pass |
1Hz～10000Hz |
BKNET-0102 Welded Pipe Eddy Current Flaw Detector Features:
High precision end and end-to-tail signal removal
High precision real-time, delayed alarm output
Fast digital／analog electronic balance
Memory track delay blanking function
Non-equal amplitude phase／amplitude alarm domain
Remote automatic help system
Synchronous alarm output for internal and external clock control
Nanjing BOKENA Automation System Co., Ltd., originated from the eddy current testing laboratory of the Nanjing University of Technology. It isone of the most professional ndt testing equipment suppliersin China. We sincerely invite and welcome people from all around the world to invest and create more values together.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Connecting rod hardness vortex sorting machine LGYDFX-01 | The connecting rod hardness eddy current testing machine has a calibration device, input compensation parameters, automatic/manual temperature comp... |
 |
Bolt Eddy Current Sorter BKNFX-11 | Bolt: Mechanical parts, cylindrical threaded fasteners with nuts. A type of fastener consisting of a head and a screw (a cylinder with an external ... |
 |
Eddy Current Testing Equipment | Are you looking for eddy current equipment for sale? ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagneti... |
 |
BKNET-0102 Welded Pipe Eddy Current Flaw Detector | Non destructive weld testing equipment is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise ... |
 |
GSET-551 Steel Wire Eddy Current Flaw Detector | GSET-551 Steel Wire Eddy Current Flaw Detector Brief Introduction Using the eddy current signal processing method and high-performance DSP algor... |
Похожие товары
 |
Многостепенний тандемный точный роликовый подшипник T-3092-6A на складе | Продавец: JinHang Precision Bearing Co.,LTD | Номер фабрики подшипников: Т-3092-6АКод товара: T-3092-6AСтруктура: Основный тип тандемного тяги ... |
 |
Пищевой винтовый экструдер многоступенчатые тандемные подшипники Т-2872-6А | Продавец: JinHang Precision Bearing Co.,LTD | Номер фабрики подшипников: Т-2872-6АКод товара: T-2872-6AОригинальное место: Китай LuoYangСмазани... |
 |
Фильмовый винтовой экструдировальный станок, редуктор, шарикоподшипник tandem roller T-25105 8A | Продавец: JinHang Precision Bearing Co.,LTD | Конструкционная фабрика №: T-25105 8AАртикул: T-25105.8AОригинальное место: Китай, ЛоянСмазка: ма... |
 |
ПВХ винтовая экструзия оборудования коробки передач роликовые подшипники T-25105 8A | Продавец: JinHang Precision Bearing Co.,LTD | Применение: коробки передач для одновинтовых и двойных экструдов в резиновой и пластмассовой пром... |
 |
Food extruder multi-stage tandem thrust bearings T-25105.6A factory | Продавец: JinHang Precision Bearing Co.,LTD | Номер фабрики подшипников: Т-25105.6АКод товара: T-25105.6AОригинальное место: Китай LuoYangСмаза... |
