Eddy Current Testing Equipment
Eddy current testing of welds is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. At the same time, we need to be clear that the welded pipe is, in general, the steel pipe that we usually say, which is a welded steel pipe.
Eddy current weld testingis a non-destructive testing technique for detecting component defects by using the principle that the eddy current induced by the AC electromagnetic coil on the surface of the metal member encounters a defect. The oscillating current is generated in the conductive member by the excitation coil by the principle of electromagnetic induction, and the amount of change in the eddy current is measured by the detecting coil, thereby obtaining information on the component defect.
Eddy current testing is a non-destructive testing technique in which an alternating current electromagnetic coil induces eddy currents on the surface of a metal member. It is suitable for the detection of defects in conductive materials, including ferromagnetic and non-ferromagnetic metal materials.
BKNET-01 2 NDT weld testing equipment is used for on-line and off-line inspection of welded pipes. It has high sensitively to axial defects such as unwelded welding, dark spots and open cracks. In the production process, products are caused by welder failure. Slow and long-term injuries can be reliably detected.
BKNET-0102 Welded Pipe Eddy Current Flaw Detector performance
|
Detection channel |
Double channel |
|
Detection speed |
1～500m/min(online) |
|
Frequency range |
100Hz-1MHz |
|
Gain |
0～99dB，step0.1dB |
|
Phase rotation |
0-360°step1° |
|
High pass |
|
|
Low pass |
1Hz～10000Hz |
BKNET-0102 Welded Pipe Eddy Current Flaw Detector Features:
High precision end and end-to-tail signal removal
High precision real-time, delayed alarm output
Fast digital／analog electronic balance
Memory track delay blanking function
Non-equal amplitude phase／amplitude alarm domain
Remote automatic help system
Synchronous alarm output for internal and external clock control
Nanjing BOKENA Automation System Co., Ltd., originated from the eddy current testing laboratory of the Nanjing University of Technology. It isone of the most professional ndt testing equipment suppliersin China. We sincerely invite and welcome people from all around the world to invest and create more values together.
在线联系供应商
Other supplier products
 |
Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02 | The technology of BKN originated from eddy current Laboratory of Institute of Materials, Nanjing University of Technology. At present, it is a lead... |
 |
Benchtop Magnetic Flux Leakage Testing Equipment | MFI Magnetic flux leakage test refers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to def... |
 |
Eddy Current Testing Equipment | Are you looking for eddy current equipment for sale? ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagneti... |
 |
Portable Magnetic Flux Leakage Testing Equipment | MFLequipmentrefers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to defects on the surface... |
 |
EDM Notch | An electric pulse is a pulse generated by electrons, and a pulse is a process of changing a voltage in a short time. Electropulsing is an unsteady ... |
Same products
 |
多级串联精密滚柱轴承T-3092-6A有货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-3092-6A项目代码：T-3092-6A结构：基本型串联推力圆柱滚子轴承原产地：中国洛阳润滑：油润滑外形公制尺寸：30*92*294mm它们在橡胶和塑料行业的平行双螺杆挤出机... |
 |
食品螺杆挤出机多级串联推力轴承T-2872-6A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-2872-6A项目代码：T-2872-6A原产地：中国洛阳润滑：油润滑外形公制尺寸：29*75*165mm外径D:75mm内径d:29mm总高度：165毫米它们在橡胶和塑料行业... |
 |
薄膜螺杆挤出机齿轮箱串联滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：395mm它们在橡胶和塑料... |
 |
PVC螺杆挤出设备齿轮箱滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 应用：橡胶和塑料工业中单螺杆和双螺杆挤出机的变速箱。深孔钻削设备摩擦焊机。轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*25... |
 |
食品挤出机多级串联推力轴承T-25105.6A工厂现货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105.6A项目代码：T-25105.6A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：255毫米轴承轴直径：0.... |
