Eddy Current Testing Equipment
GSET-551 Steel Wire Eddy Current Flaw Detector Brief
Using the eddy current signal processing method and high-performance DSP algorithm, the NDT wire rope testerdetection ability of micro-crack is as high as 0.05mm deep crack.
Using computer digital technology and "digital eddy current detection technology" to achieve high-speed data processing capabilities, detection speed can be reached to 1~500m/min. Technology can effectively suppress all kinds of interference signals. It has waveform, amplitude, phase, X-axis and Y-axis signals.
The professional "digital filtering" is adopted to effectively suppress the interference signal in the field and ensure the accuracy and stability of the detection.
Features of GSET-551 Steel Wire Eddy Current Flaw Detector
The detector detects the minimum metal cross-sectional area change and the minimum length of the damage length corresponding to the local damage.
The detector detects the minimum metal cross-sectional area change and the damage length minimum size corresponding to the metal cross-sectional area loss.
The maximum value of the random error obtained by performing multiple consecutive measurements of the same metal cross-sectional area change in the same test sample under the same test environment and conditions within the instrument range.
Within the range of the instrument, the metal cross-sectional area of the test sample is linearly proportional to the absolute value of the maximum deviation between the measured curve of the instrument and the calibration curve fitted by the measured value of the cross-sectional area of the metal.
The value of the metal cross-sectional area loss measured by the instrument minus the actual value of the metal cross-sectional area loss within the instrument's range.
In the range of the instrument range, under the condition of the length loss of the cross-sectional area of the metal, the cross-sectional area loss of the metal on the wire rope measured by the detector is matched with the value of the loss of the cross-sectional area of a group of wire ropes measured by the instrument. The absolute value of the maximum deviation between the calibration curves.
The detector is capable of detecting the resolved minimum distance.
The detector can detect and display changes in metal cross-sectional area loss (LMA) on one channel, and detect and display local damage (LF) on the other channel. The detector recording device can be a computer, graphic recorder or other matches. device.
The detector cannot simultaneously detect and display metal cross-sectional area loss changes and local damage, and can only detect and display one of them. The detector recording signal device can be a computer, a graphic recorder or other matching devices.
The detector principle and composition meet the requirements of the GB/T 21837-2008 standard, and it has a detector for detecting distance display, data storage or recording function.
GSET-551 Steel Wire Eddy Current Flaw Detector performance
|
Detection channel |
Single-channel |
|
Detection speed |
1～500m/min(on-line) |
|
Frequency range |
100Hz-10MHz |
|
gain |
0～99dB，step size 0.1dB |
|
Advanced filtering |
have |
|
High pass |
|
|
Low pass |
1Hz～10000Hz |
|
Phase rotation |
0-360 ° step 1 ° |
|
Synchronized alarm output controlled by an internal and external clock |
|
High precision end and end-to-tail signal removal |
|
High precision real-time, delayed alarm output |
|
Fast digital／analog electronic balance |
|
Memory track delay blanking function |
|
Real-time impedance plane display |
|
The instrument a match any probe |
|
Remote automatic help system |
|
Computer full digital parameter adjustment |
|
Non-equal amplitude phase／amplitude alarm domain |
Nanjing BOKENA Automation System Co., Ltd., originated from the eddy current testing laboratory of the Nanjing University of Technology. It isone of the most professional ndt testing equipment suppliersin China. We sincerely invite and welcome people from all around the world to invest and create more values together.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
GSET-551 Steel Wire Eddy Current Flaw Detector | GSET-551 Steel Wire Eddy Current Flaw Detector Brief Introduction Using the eddy current signal processing method and high-performance DSP algori... |
 |
BKNET-0102 Welded Pipe Eddy Current Flaw Detector | Eddy current weld testing is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. ... |
 |
BKNET-0102 Welded Pipe Eddy Current Flaw Detector | Eddy current weld testingis the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. A... |
 |
Wireless Transmission Pipe Ultrasonic Flaw Detector | The ultrasonic pipe testing equipmentsystem is suitable for the automatic detection of various internal and external defects of steel pipes. The pr... |
 |
Portable Magnetic Flux Leakage Testing Equipment | Magnetic flux leakage test refers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to defects... |
Похожие товары
 |
Многостепенний тандемный точный роликовый подшипник T-3092-6A на складе | Продавец: JinHang Precision Bearing Co.,LTD | Номер фабрики подшипников: Т-3092-6АКод товара: T-3092-6AСтруктура: Основный тип тандемного тяги ... |
 |
Пищевой винтовый экструдер многоступенчатые тандемные подшипники Т-2872-6А | Продавец: JinHang Precision Bearing Co.,LTD | Номер фабрики подшипников: Т-2872-6АКод товара: T-2872-6AОригинальное место: Китай LuoYangСмазани... |
 |
Фильмовый винтовой экструдировальный станок, редуктор, шарикоподшипник tandem roller T-25105 8A | Продавец: JinHang Precision Bearing Co.,LTD | Конструкционная фабрика №: T-25105 8AАртикул: T-25105.8AОригинальное место: Китай, ЛоянСмазка: ма... |
 |
ПВХ винтовая экструзия оборудования коробки передач роликовые подшипники T-25105 8A | Продавец: JinHang Precision Bearing Co.,LTD | Применение: коробки передач для одновинтовых и двойных экструдов в резиновой и пластмассовой пром... |
 |
Food extruder multi-stage tandem thrust bearings T-25105.6A factory | Продавец: JinHang Precision Bearing Co.,LTD | Номер фабрики подшипников: Т-25105.6АКод товара: T-25105.6AОригинальное место: Китай LuoYangСмаза... |
