Auto Parts And Accessories
The SMC cable bracket is a combination consisting of a cable bracket, a post and a fixed pin. The material of the column and the pin is also made by the high temperature pultrusion of the FRP composite. The column can be arbitrarily cut length according to the needs, the height of the layer is adjusted, and the assembly is free. The cable bracket has various specifications to meet different lengths and load requirements.
Light weight, high strength, aging resistance, UV protection, more importantly, 1 mm can withstand voltages above 10,000 volts, it is a good insulation material.
Features: high insulation, chemical resistance, high fire resistance, good water resistance, accurate size, stable working performance, light weight, high strength, acid and alkali resistance, waterproof, moisture-proof.
SMC Cable BraketSpecification
|
Project |
SMC Cable Braket |
Galvanized angle bracket |
|
Density (g/cm3) |
||
|
Specific strength |
167 |
90 |
|
Corrosion resistance (80°/100h) |
||
|
Insulation strength (kv/mm) |
Conductive |
|
|
Flame retardancy |
meets the FH-1 |
-- |
|
Water resistance (%) |
-- |
|
|
Corrosion resistance |
Corrosion、acid、alkali、salt resistant |
Corrosive, easy to rust |
|
insulation |
insulation |
Conduction |
|
Mechanical strength |
Top force 2.5kN deflection 1.0cm |
Top force 2.5kN deflection 1.2cm |
|
Lateral force 0.5kN |
Top horizontal offset 7cm |
Top horizontal offset 7cm |
|
Weight |
light |
weight |
|
Eddy current effect (loss) |
no |
Large loss |
|
Manufacturing process is difficult |
easy |
Many processes and long cycle |
|
Cable outer sheath scraping test |
No visible damage |
There is a little visible damage |
|
Raw material |
Cheap, resource-rich |
More expensive, partially imported |
|
Maintenance |
Free maintenance |
5-7 years need to be repaired once |
|
Installation process is difficult or easy |
Short time and easy to install |
Long time, difficult to install |
|
Use life |
30 years |
10 years |
Zhejiang Aobang Technology Co., Ltd.is one of the most professional sheet molding compound manufacturersin China, and we hope to gain recognition and support from our customers and to develop mutual cooperation.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
SMC/BMC Antenna Reflector | (1) High precision, high efficiency, and high gain. The most important job of using SMC for the manufacture of antennas is to fully exploit its fe... |
 |
Auto Parts Mould | Auto Parts MouldFeatures Injection molding and pressure molding are the main methods. When designing the flow channel and parting surface, the cav... |
 |
BMC, SMC, GRP, GFK Ceiling | Aobang composite ceiling is divided into: BMC ceiling, SMC ceiling, GRP ceiling, GFK Ceiling. The ceiling materials have been developed for more t... |
 |
Auto Parts And Accessories | Frame Moulding Features Mainly for pressure molding, the cavity pressure should be considered as small as possible when designing the parting sur... |
 |
Motor Mold | Motor MoldDescription Mainly for injection molding, the design of the runner and the parting surface should be as small as possible, and the cross... |
Похожие товары
 |
Industrial Mould | Продавец: HANKING MOULD ENGINEERING LTD. | Industrial mould is not a mold technology process, but a type of mold that is distinguished from ... |
 |
SMC/BMC Framework | Продавец: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | SMC/BMC FrameworkDescription Strong plasticity, precise size, high insulation and high temperatu... |
 |
Shell Moulding | Продавец: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | Shell MouldingDescription Mainly for injection molding, the cavity pressure should be considered... |
|
|
Motor Mold | Продавец: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | Motor MoldDescription Mainly for injection molding, the design of the runner and the parting sur... |
 |
Low-Voltage Electrical Products | Продавец: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | Low Voltage Electrical Appliance Mould List Mainly refers to circuit breakers, fuses, switch box... |
