SMC Cable Braket
The SMC cablebracket is a combination consisting of a cable bracket, a post and a fixed pin. The material of the column and the pin is also made by the high temperature pultrusion of the FRPandBMCcomposite. The column can be arbitrarily cut length according to the needs, the height of the layer is adjusted, and the assembly is free. The cable bracket has various specifications to meet different lengths and load requirements.
Light weight, high strength, aging resistance, UV protection, more importantly, 1 mm can withstand voltages above 10,000 volts, it is a good insulation material.
Features: high insulation, chemical resistance, high fire resistance, good water resistance, accurate size, stable working performance, light weight, high strength, acid and alkali resistance, waterproof, moisture-proof.
SMC Cable Braket Specification
|
Project |
SMC Cable Braket |
Galvanized angle bracket |
|
Density (g/cm3) |
||
|
Specific strength |
167 |
90 |
|
Corrosion resistance (80°/100h) |
||
|
Insulation strength (kv/mm) |
Conductive |
|
|
Flame retardancy |
meets the FH-1 |
-- |
|
Water resistance (%) |
-- |
|
|
Corrosion resistance |
Corrosion、acid、alkali、salt resistant |
Corrosive, easy to rust |
|
insulation |
insulation |
Conduction |
|
Mechanical strength |
Top force 2.5kN deflection 1.0cm |
Top force 2.5kN deflection 1.2cm |
|
Lateral force 0.5kN |
Top horizontal offset 7cm |
Top horizontal offset 7cm |
|
Weight |
light |
weight |
|
Eddy current effect (loss) |
no |
Large loss |
|
Manufacturing process is difficult |
easy |
Many processes and long cycle |
|
Cable outer sheath scraping test |
No visible damage |
There is a little visible damage |
|
Raw material |
Cheap, resource-rich |
More expensive, partially imported |
|
Maintenance |
Free maintenance |
5-7 years need to be repaired once |
|
Installation process is difficult or easy |
Short time and easy to install |
Long time, difficult to install |
|
Use life |
30 years |
10 years |
Now the price of bmc compositeis affordable, if you have needs, please contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
BMC, SMC, GRP, GFK Building & Decoration Materials | Building decoration materials, also known as building finishing materials, refer to the materials laid or painted on the surface of buildings to de... |
 |
SMC Automotive | SMC Car PartsDescription Parts made from sheet molding compound (SMC) are typically 25-35% lighter than steel parts and aluminum products of the s... |
 |
Auto Parts Mould | Auto Parts Mould Features Injection molding and pressure molding are the main methods. When designing the flow channel and parting surface, the... |
 |
BMC, SMC, GRP, GFK Roof Tiles | Aobang composite roofing tiles is divided into: BMC roofing tiles, SMC roofing tiles, GRP roof tiles, GFK roofing tiles. Due to the excellent prop... |
 |
SMC Automotive Molding, Car Mould | Cars, buses, trucks, transport and special vehicles • Weight: Parts made from sheet molding compound (automotive smc) are typically 25-35%... |
Похожие товары
 |
Front Bumper Lower Lip Mould | Продавец: Taizhou Huangyan Chenpeng Mould Co., Ltd. | Introducing the for 2021 Honda CRV Front Bumper Lower Lip Mould: Elevate Your Driving Experienc... |
 |
Bottle cap mold | Продавец: Taizhou Huangyan Yongsheng Mould Co., Ltd. | Taizhou Yongsheng Mould Co., Ltd. can produce cap moulds （）within 64 cavities. The hot runner or ... |
 |
Plastic Injection Mould For 2009 Audi A5 Front Bumper | Продавец: Taizhou Huangyan Chenpeng Mould Co., Ltd. | Our Advantage:1.We have developed about 1000 PCS bumper mould since we founded.2.Our company's mo... |
 |
Double Color Mold For Car Head Lighting Two-Shot Mold | Продавец: Taizhou Toolsong Mould Co., Ltd. | Double Color Mold For Car Head Lighting Two-Shot Mold Double color lens mold for car head lighti... |
 |
Front Lamp Lens Injection headlight mold | Продавец: Taizhou Toolsong Mould Co., Ltd. | Front Lamp Lens Injection headlight mold The headlamp lens has a high standard in its aesthetics... |
