SMC Cable Braket
The SMC cablebracket is a combination consisting of a cable bracket, a post and a fixed pin. The material of the column and the pin is also made by the high temperature pultrusion of the FRPandBMCcomposite. The column can be arbitrarily cut length according to the needs, the height of the layer is adjusted, and the assembly is free. The cable bracket has various specifications to meet different lengths and load requirements.
Light weight, high strength, aging resistance, UV protection, more importantly, 1 mm can withstand voltages above 10,000 volts, it is a good insulation material.
Features: high insulation, chemical resistance, high fire resistance, good water resistance, accurate size, stable working performance, light weight, high strength, acid and alkali resistance, waterproof, moisture-proof.
SMC Cable Braket Specification
|
Project |
SMC Cable Braket |
Galvanized angle bracket |
|
Density (g/cm3) |
||
|
Specific strength |
167 |
90 |
|
Corrosion resistance (80°/100h) |
||
|
Insulation strength (kv/mm) |
Conductive |
|
|
Flame retardancy |
meets the FH-1 |
-- |
|
Water resistance (%) |
-- |
|
|
Corrosion resistance |
Corrosion、acid、alkali、salt resistant |
Corrosive, easy to rust |
|
insulation |
insulation |
Conduction |
|
Mechanical strength |
Top force 2.5kN deflection 1.0cm |
Top force 2.5kN deflection 1.2cm |
|
Lateral force 0.5kN |
Top horizontal offset 7cm |
Top horizontal offset 7cm |
|
Weight |
light |
weight |
|
Eddy current effect (loss) |
no |
Large loss |
|
Manufacturing process is difficult |
easy |
Many processes and long cycle |
|
Cable outer sheath scraping test |
No visible damage |
There is a little visible damage |
|
Raw material |
Cheap, resource-rich |
More expensive, partially imported |
|
Maintenance |
Free maintenance |
5-7 years need to be repaired once |
|
Installation process is difficult or easy |
Short time and easy to install |
Long time, difficult to install |
|
Use life |
30 years |
10 years |
Now the price of bmc compositeis affordable, if you have needs, please contact us.
在线联系供应商
Other supplier products
 |
Motor Mold | Motor Mold Description Mainly for injection molding, the design of the runner and the parting surface should be as small as possible, and the cros... |
 |
BMC, SMC, GRP, GFK Ceiling | Ceiling is a kind of decoration on the top of living environment. In short, it refers to the ceiling decoration, is an important part of interior d... |
 |
BMC/SMC Molded Products | BMCSMCthermosetting plastic products are produced by SMC and BMCmoldingprocess. PRODUCTS Types of BMC/SMC Molded Products BMC/SMC Motor SMC/B... |
 |
Electric Control Box | BMC/SMC PRODUCTS BMC/SMC Motor SMC Cable Braket High-Voltage Electrical Products Low-Voltage Electrical Products Auto Parts And Accessories Ca... |
 |
Flange Molding | Mainly for injection molding, the cavity pressure should be considered as small as possible when designing the runner and the parting surface. Sinc... |
Same products
|
|
BMC/SMC Molded Products | 卖方: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | BMCSMCthermosetting plastic products are produced by SMC and BMCmoldingprocess. PRODUCTS Type... |
 |
SMC Antenna Reflector Mould | 卖方: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | SMC AntennaReflector Mould The satellite earth antenna is the important earth satellite equipmen... |
 |
Auto Parts Mould | 卖方: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | BMC Car PartsMould Automobiles are different in size and shape. That means automobile suppliers ... |
 |
Plastic Household Mould | 卖方: Unique Solutions Mold | Plastic Household Mould The smart switches and smart sockets of the smart home systems have the ... |
 |
Overmolding & 2k Molding | 卖方: Unique Solutions Mold | Molding Over Molding& 2k Molding The same type of material of different colors is usually us... |
