Automotive Mold
Large drop of automotive mold top and bottom; The automotive mold technology is complicated; The injection system is many and complicated; The mold cost is ver high.
AUTOMOTIVE MOLD TYPES
Automotive AC Air Outlet
The air outlets of automotive AC are generally assembled by multiple parts, classified according to their functions and purposes: there are exterior molds, functional molds, or both exterior and functional molds.
Automotive Mold Manufacturers
With over 15 years of experience in automotive mold development and production, USM will make mold flow analysis from the DFM report step to ensure that the pressure will be controlled at a reasonable range during injection, and there are no weld marks and other defects on the part surface.
Automotive Grille Mold
The part surface of the air intake grille generally has several treatment methods such as leather texture, sandblasting, paint spraying, and electroplating, the materials usually are PP, ABS, ASA, etc., and the surface of the bumper decorative grille is generally treated with leather texture and sandblasting, mainly PP material.
Automotive Door Mold
The plastic application in automotive is divided into interior parts, exterior parts, and functional parts. According to different material properties, plastics are usually divided into three types: general plastics, engineering plastics, and special plastics.
Auto Parts Mould
The automotive console is an external part in automotive interior parts, and no weld line on the part surface, the console's gating system generally uses a valve gate of hot runner system, the gate position usually has a direct injection gate on the non-critical surface which is to save plastic material, the shut-off area will be injected on side of the non-critical surface, or the middle area will be injected to the non-critical surface by the banana gate.
Automotive Molds Characteristics
1. The automotive mold size is very big, and the largest mold weight is nearly 40T;
2. The mold structure is complex;
3. There are many irregular curved surfaces on the parting surface.
As one of plastic injection moulding products manufacturers, we can offer kinds of 2K molding parts for sale, anything you need, please leave us a message.
Другие товары поставщика
|
|
Medical Plastic Mold |
Product material: PP material in medical-grade
Mold steel: S136 HRC 52-54
Mold life: 1 million
Hot runner brand: Incoe
Mold base: LKM
... |
|
|
Multi Cavity Mold |
The runner filling balance must be considered when designing the multi cavity plastic moldin order to ensure the best effect of filling balance, th... |
|
|
Car Door Mold |
Car Window Mould
Automotive Door Bracket Mold can shorten the fixture wasting(the fixture will improve the slight deformation) and it has very goo... |
|
|
Pre-Deformation Mold |
Pre Deformation Mold
When the plastic material rushes into the mold cavity, it loses heat due to heat conduction, and the melted plastic will free... |
|
|
32 Cavity Mold |
32 Cavity Mold
In terms of multi-cavity molds, we pay attention to the design of layout and runner filling balance, which is also the key to the s... |
Все товары поставщика
Похожие товары
