Automotive Mold
Large drop of automotive mold top and bottom; The automotive mold technology is complicated; The injection system is many and complicated; The mold cost is ver high.
AUTOMOTIVE MOLD TYPES
Automotive AC Air Outlet
The air outlets of automotive AC are generally assembled by multiple parts, classified according to their functions and purposes: there are exterior molds, functional molds, or both exterior and functional molds.
Automotive Mold Manufacturers
With over 15 years of experience in automotive mold development and production, USM will make mold flow analysis from the DFM report step to ensure that the pressure will be controlled at a reasonable range during injection, and there are no weld marks and other defects on the part surface.
Automotive Grille Mold
The part surface of the air intake grille generally has several treatment methods such as leather texture, sandblasting, paint spraying, and electroplating, the materials usually are PP, ABS, ASA, etc., and the surface of the bumper decorative grille is generally treated with leather texture and sandblasting, mainly PP material.
Automotive Door Mold
The plastic application in automotive is divided into interior parts, exterior parts, and functional parts. According to different material properties, plastics are usually divided into three types: general plastics, engineering plastics, and special plastics.
Auto Parts Mould
The automotive console is an external part in automotive interior parts, and no weld line on the part surface, the console's gating system generally uses a valve gate of hot runner system, the gate position usually has a direct injection gate on the non-critical surface which is to save plastic material, the shut-off area will be injected on side of the non-critical surface, or the middle area will be injected to the non-critical surface by the banana gate.
Automotive Molds Characteristics
1. The automotive mold size is very big, and the largest mold weight is nearly 40T;
2. The mold structure is complex;
3. There are many irregular curved surfaces on the parting surface.
As one of plastic injection moulding products manufacturers, we can offer kinds of 2K molding parts for sale, anything you need, please leave us a message.
Other supplier products
|
|
Water Proof Plastic Enclosure Mold |
Water Proof Plastic Enclosure Mold
Both the overmolding and two-color molding are injected by two different materials one by one, then get one w... |
|
|
TV Frame Mold |
TV Mold
USM team has over 16 years of rich experience in gas-assisted mold manufacturing and mold trial, which can satisfy the mold making and i... |
|
|
Gas & Water Assisted Injection Mold |
Gas & Water Assisted Injection Mold
Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injection ... |
|
|
Auto Parts Mould |
Injection Moulding Automotive Partsfeatures:
There are many undercuts on product inside and outside, and the undercut area is big too, the... |
|
|
Automotive Water Intake Manifold Mould |
AutomotiveWater Inlet Manifold
Injecting gas through the nozzle is a typical method used in rod-shaped products, because this method does not requ... |
供应产品
Same products
