Automotive Mold
Large drop of automotive mold top and bottom; The automotive mold technology is complicated; The injection system is many and complicated; The mold cost is ver high.
AUTOMOTIVE MOLD TYPES
Automotive AC Air Outlet
The air outlets of automotive AC are generally assembled by multiple parts, classified according to their functions and purposes: there are exterior molds, functional molds, or both exterior and functional molds.
Automotive Mold Manufacturers
With over 15 years of experience in automotive mold development and production, USM will make mold flow analysis from the DFM report step to ensure that the pressure will be controlled at a reasonable range during injection, and there are no weld marks and other defects on the part surface.
Automotive Grille Mold
The part surface of the air intake grille generally has several treatment methods such as leather texture, sandblasting, paint spraying, and electroplating, the materials usually are PP, ABS, ASA, etc., and the surface of the bumper decorative grille is generally treated with leather texture and sandblasting, mainly PP material.
Automotive Door Mold
The plastic application in automotive is divided into interior parts, exterior parts, and functional parts. According to different material properties, plastics are usually divided into three types: general plastics, engineering plastics, and special plastics.
Auto Parts Mould
The automotive console is an external part in automotive interior parts, and no weld line on the part surface, the console's gating system generally uses a valve gate of hot runner system, the gate position usually has a direct injection gate on the non-critical surface which is to save plastic material, the shut-off area will be injected on side of the non-critical surface, or the middle area will be injected to the non-critical surface by the banana gate.
Automotive Molds Characteristics
1. The automotive mold size is very big, and the largest mold weight is nearly 40T;
2. The mold structure is complex;
3. There are many irregular curved surfaces on the parting surface.
As one of plastic injection moulding products manufacturers, we can offer kinds of 2K molding parts for sale, anything you need, please leave us a message.
Other supplier products
|
|
Gas & Water Assisted Injection Mold |
Gas & Water assisted injection molding
Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injecti... |
|
|
Bike Frame Mold for Kids |
Bike Frame Mold
Nowadays, gas-assisted injection molding has been successfully applied to the fields of the automotive, home appliance, furniture,... |
|
|
4 Cavity Mold |
4 Cavity Injection Mold
The multi-cavity mold can save production time, for example, one mold can produce 1 piece of part in one minute, but it ca... |
|
|
32 Cavity Mold |
32 Cavity Mold
In terms of multi-cavity molds, we pay attention to the design of layout and runner filling balance, which is also the key to the s... |
|
|
Drip Tip Mold |
Electronic parts
2k Electronic Cigarette Drip Tip Moldadvantages:
Good product consistency and low defect rate.
If you need high q... |
All supplier products
Same products
