6 Inch Butterfly Valve
Description of 6 Inch Butterfly Valve:
ZECO provides detailed installation instructions to ensure high performance and long service life of the 6 wafer butterfly valve. The capacity if piping flanges and valve depends the deformation of gaskets. Acting force of bolting is not only resists force to loosen the connection, but also to keep necessary compressing stress. Taking note of the force does not exceed the gasket load and pressure load. In order to ensure good connection, following instructions shall be noted.If you want to know 6 inch butterfly valve price, please contact us.(a) Check flange surface, if any defect appears leakage, groove or impress, repair before installation;(b) The installation requests of Cast iron flange are more than the ductile cast iron. Proposed to use low-strength steel Bolted to reduce as a result of excessive pre-compression flange of the possibility of exceeding the prescribed stress. To fit flat flange gasket in the flat flange to prevent excessive torque of bolt flange damage. Should not be confused with convex planar flange of the loaded flange In the cast iron flange connection is particularly important that the top is installed on the better to ensure that in the absence of excessive load bolted gasket circumstances make an appropriate compaction force;(c) Gasket have the capacity of resisting deformation and damage;(d) Check the centration of assemble-part flanges, Lubricate the threads of boltings. Boltings shall be fasten sequential to make sure level contact between flange and gasket.
Features of 6 Inch Butterfly Valve:
- One of the advantage of ZECO 6 inch butterfly valve is fast closure;
- One of the advantage of ZECO 6 inch butterfly valve is disc sealing material is high grade rubber or Teflon, which successfully resist aging and abrasion;
- One of the advantage of ZECO 6 inch butterfly valve is the bracket connected with the drive device conforms to ISO5211 standard;
- One of the advantage of ZECO 6 inch butterfly valve is the stem is designed to meet API 609 requirements with a blowout resistant design.
Material of 6 Inch Butterfly Valve:
|
No |
Part |
Material |
|
1 |
Body |
ASTM A351 CF8M |
|
2 |
Seal Ring |
Graphite + SS316 |
|
3 |
Retainer Flange |
ASTM A182 F316 |
|
4 |
Pin |
ASTM A276 316 |
|
5 |
Disc |
ASTM A351 CF8M |
|
6 |
Stem |
ASTM A276 316 |
|
7 |
Stem Packing |
Graphite |
|
8 |
Stem Beating |
SS316 + PTFE |
|
9 |
Bolt |
ASTM A193 B8 |
|
10 |
Nut |
ASTM A194 8 |
|
11 |
Yoke |
ASTM A216 WCB |
As a china ball valve, ZECO always adhere to exceed customer expectations, to provide customers with more value-added.services and products as the ultimate goal.
ZECO Valve Group is established in 1991, as a industrial valve manufacturer in Shanghai, China. We have 5 valve factories in China, which are located in Shanghai, Yancheng and Wenzhou, which mainly produce and supply wedge gate valves, through conduit gate valves, floating ball valves, trunnion mounted ball valves, globe valves, swing check valves, swing check valves, dual plate check valves and forged steel valves. Valve sizing 1/2" to 88", rating 150LB through 2500LB, served covering oil, gas, chemical, energy, refinery, LNG, LPG and many other fields. With the growing need, ZECO international standard valvedeveloped our own laboratory for research & development for international standard valve design innovation and vertification, which includes PT, MT, UT, FE test. ZECO Valve Group is a humble and united team, to be more diligent and progressive to show the itegrity to our clients.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
| Metal Seated Gate Valve | Features of Metal Seated Gate Valve The stem is permanently sealed by three independent seals, and if the seal wears out after long use, the gland... | |
| Pressure Control Valve | Pressure control valves use the balancing principle of hydraulic pressure and spring force to adjust the pressure of the hydraulic system and contr... | |
| Top Entry Ball Valve | Description Due to the distinctive nature of the environmental conditions and operating conditions of the process, a typical ball valve is not suf... | |
| Gate Valve | ZECO is one of the professionalgate valve manufacturing companies, specializing in the production of wedge gate valve and through conduit gate valv... | |
| Dirt Separator | Basic informationThis valve is used for water purification.Features1. Easy to operate;2. No water stop is required to clean the cavity body;3. Dirt... |
Похожие товары
| Belaz Dump Truck Parts | Продавец: XINGTAI ME MINING EQUIPMENT CO.,LTD. | Belaz Dump Truck Parts Spare Parts-China Manufacturer and Supplier XTME offers a comprehens... | |
| Komatsu Dump Truck Parts | Продавец: XINGTAI ME MINING EQUIPMENT CO.,LTD. | Komatsu Dump Truck Parts -China Manufacturer and Supplier 100% OEM-Compatible Spare Parts-K... | |
| China Gate valve | Продавец: Yuanda Valve Group Co.,Ltd. | China Gate valve China Gate valve A is a type of valve that uses a gate or wedge-shaped dis... | |
| Non Return Valve Suppliers China | Продавец: Yuanda Valve Group Co.,Ltd. | Non Return Valve Suppliers China refers to the opening and closing member for the circular v... | |
| Ball Valve | Продавец: Yuanda Valve Group Co.,Ltd. | Ball Valve Yuanda offers Cast Iron Ball Valves JIS 10K that are essential components for flu... |
















