6 Inch Butterfly Valve
Description of 6 Inch Butterfly Valve:
ZECO provides detailed installation instructions to ensure high performance and long service life of the 6 wafer butterfly valve. The capacity if piping flanges and valve depends the deformation of gaskets. Acting force of bolting is not only resists force to loosen the connection, but also to keep necessary compressing stress. Taking note of the force does not exceed the gasket load and pressure load. In order to ensure good connection, following instructions shall be noted.If you want to know 6 inch butterfly valve price, please contact us.(a) Check flange surface, if any defect appears leakage, groove or impress, repair before installation;(b) The installation requests of Cast iron flange are more than the ductile cast iron. Proposed to use low-strength steel Bolted to reduce as a result of excessive pre-compression flange of the possibility of exceeding the prescribed stress. To fit flat flange gasket in the flat flange to prevent excessive torque of bolt flange damage. Should not be confused with convex planar flange of the loaded flange In the cast iron flange connection is particularly important that the top is installed on the better to ensure that in the absence of excessive load bolted gasket circumstances make an appropriate compaction force;(c) Gasket have the capacity of resisting deformation and damage;(d) Check the centration of assemble-part flanges, Lubricate the threads of boltings. Boltings shall be fasten sequential to make sure level contact between flange and gasket.
Features of 6 Inch Butterfly Valve:
- One of the advantage of ZECO 6 inch butterfly valve is fast closure;
- One of the advantage of ZECO 6 inch butterfly valve is disc sealing material is high grade rubber or Teflon, which successfully resist aging and abrasion;
- One of the advantage of ZECO 6 inch butterfly valve is the bracket connected with the drive device conforms to ISO5211 standard;
- One of the advantage of ZECO 6 inch butterfly valve is the stem is designed to meet API 609 requirements with a blowout resistant design.
Material of 6 Inch Butterfly Valve:
|
No |
Part |
Material |
|
1 |
Body |
ASTM A351 CF8M |
|
2 |
Seal Ring |
Graphite + SS316 |
|
3 |
Retainer Flange |
ASTM A182 F316 |
|
4 |
Pin |
ASTM A276 316 |
|
5 |
Disc |
ASTM A351 CF8M |
|
6 |
Stem |
ASTM A276 316 |
|
7 |
Stem Packing |
Graphite |
|
8 |
Stem Beating |
SS316 + PTFE |
|
9 |
Bolt |
ASTM A193 B8 |
|
10 |
Nut |
ASTM A194 8 |
|
11 |
Yoke |
ASTM A216 WCB |
As a china ball valve, ZECO always adhere to exceed customer expectations, to provide customers with more value-added.services and products as the ultimate goal.
ZECO Valve Group is established in 1991, as a industrial valve manufacturer in Shanghai, China. We have 5 valve factories in China, which are located in Shanghai, Yancheng and Wenzhou, which mainly produce and supply wedge gate valves, through conduit gate valves, floating ball valves, trunnion mounted ball valves, globe valves, swing check valves, swing check valves, dual plate check valves and forged steel valves. Valve sizing 1/2" to 88", rating 150LB through 2500LB, served covering oil, gas, chemical, energy, refinery, LNG, LPG and many other fields. With the growing need, ZECO international standard valvedeveloped our own laboratory for research & development for international standard valve design innovation and vertification, which includes PT, MT, UT, FE test. ZECO Valve Group is a humble and united team, to be more diligent and progressive to show the itegrity to our clients.
在线联系供应商
Other supplier products
 |
Backflow Preventers | Basic informationThis sustainingvalveis opened to prevent the pipeline and equipment from being damaged due to overpressure when the pressure in th... |
 |
Wafer Check Valve | What is a Wafer Check Valve? Wafer check valves are in-line piping valves used to control fluid flow direction and reduce or fully prevent possibl... |
 |
4 Inch Ball Valve | Description of 4 Inch Ball Valve: ZECO4 inch flanged ball valveis also the most common batch products, which are mainly floating ball valves. Occa... |
 |
Metal Seated Ball Valve | As one of the china ball valve manufacturers, ZECO always adhere to exceed customer expectations,to provide customers with more international stand... |
 |
Clean Water Air Release Valve | Basic informationThis is installed at the highest point of the pipe or where there is a closed air, which is used to discharge the gas in the pipe ... |
Same products
 |
Belaz Dump Truck Parts | 卖方: XINGTAI ME MINING EQUIPMENT CO.,LTD. | Belaz Dump Truck Parts Spare Parts-China Manufacturer and Supplier XTME offers a comprehens... |
 |
Komatsu Dump Truck Parts | 卖方: XINGTAI ME MINING EQUIPMENT CO.,LTD. | Komatsu Dump Truck Parts -China Manufacturer and Supplier 100% OEM-Compatible Spare Parts-K... |
 |
China Gate valve | 卖方: Yuanda Valve Group Co.,Ltd. | China Gate valve China Gate valve A is a type of valve that uses a gate or wedge-shaped dis... |
 |
Non Return Valve Suppliers China | 卖方: Yuanda Valve Group Co.,Ltd. | Non Return Valve Suppliers China refers to the opening and closing member for the circular v... |
 |
Ball Valve | 卖方: Yuanda Valve Group Co.,Ltd. | Ball Valve Yuanda offers Cast Iron Ball Valves JIS 10K that are essential components for flu... |
