Electric Butterfly Valve
Description of Electric Butterfly Valve:
ZECO electric butterfly valve is named after electric actuator operated. Butterfly valve in the pipeline for a long time to use, may be due to special medium, temperature or pressure causes a small number of problems, encounter these problems, we must think of ways to solve, and in order to prevent, no problems of the product for regular maintenance. The leakage of stem sealing usually caused by packing abrasion,can make up for tightening the packing gland. Too large packing force may increase stem friction, and make stem to be hard operated and accelerated the abrasion of packing.
Good sealing inside valve will be affected the sealing performance because of the damage or normal abrasion. For the harsh working conditions, the estimation and repairment beyond the scope of this manual, due to a variety of different structural forms, if need to know in advance, should cooperate with the manufacturer to find a suitable method. The external construction of valve is easy to check and maintain. So rational approach should be taken to prevent mechanical to damage the valve, prevent valve corrosion by the sediments in the atmosphere、chemical substances or wet gas and deterioration of its quality. Thread、bearings or gears work like the working interface should be periodic lubrication.
Features of Electric Butterfly Valve:
Material of Electric Butterfly Valve:
No |
Part |
Material |
1 |
Body |
ASTM A216 WCB + 13Cr |
2 |
Seal Ring |
Graphite + SS304 |
3 |
Retainer Flange |
ASTM A105 |
4 |
Pin |
ASTM A276 410 |
5 |
Disc |
ASTM A216 WCB |
6 |
Stem |
ASTM A276 410 |
7 |
Stem Packing |
Graphite |
8 |
Stem Beating |
SS304 + PTFE |
9 |
Bolt |
ASTM A193 B7 |
10 |
Nut |
ASTM A194 2H |
11 |
Yoke |
ASTM A216 WCB |
Now the electric butterfly valve priceis low, if you want to buy our products,leave us a message.
ZECO Valve Group, as one of the China check valve manufacturers, founded in 1991 located in Shanghai, Yancheng, Wenzhou with focus on manufacturing through conduit gate Valve China, floating ball valve, trunnion mounted ball valve, top entry ball valve,swing check valve, dual plate check valve and forged valve.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
Flanged Concentric Butterfly Valve | Basic informationThis Flanged is used in various service and drain lines as truncation and regulating equipment.Features1. Bidirectional sealing, n... | |
Backflow Preventers | What is China check valve?Basic information This valve can be installed at the water outlet of the pump or the water outlet pipe to prevent backflo... | |
Altitude Control Valve | ZECO Valve Group is established in 1991, as an experienced china valve manufacturer. We have 5 factories in China, which are located in Shanghai, Y... | |
Anti Water Hammer Valve | ZECO is one of the leading check valve manufacturers china, China. ZECO check valveprovides non-slam closure, have a low head loss and close drip-t... | |
Pump Control Valve | Festures of pump flow control valve Slow closing effectively prevents water hammer. Stop pump stable and save energy Full port, small flui... |
Похожие товары
Tin Zinc Lead Bronze Rod | Продавец: Ningbo Jintian Copper (Group) Co., Ltd., | Tin ZincLead Bronze Rod The tin-zinc-lead bronze produced by our company can be used in pipeline... | |
Tin Phosphor Bronze Strip | Продавец: Ningbo Jintian Copper (Group) Co., Ltd., | Tin Phosphor Bronze Strip Copper alloy with Cu-Sn-P as the main alloying element is called tin-p... | |
Special Shaped Copper Busbar | Продавец: Ningbo Jintian Copper (Group) Co., Ltd., | Special Shaped Copper Busbar The special-shaped bending copper busbars produced by our company a... | |
Solder Ring Copper Fitting | Продавец: Ningbo Jintian Copper (Group) Co., Ltd., | Solder Ring Copper Fitting A solder ring fitting is a pre-soldered capillary connector for joini... | |
Profile Rod | Продавец: Ningbo Jintian Copper (Group) Co., Ltd., | Profile Rod The special-shaped lock body bar produced by our company has thousands of specificat... |