Pump Control Valve

This valve is installed at the outlet of the water pump. It can prevent the backflow of the medium, linked with the water pump, and can effectively prevent the water hammer phenomenon.

Festures of pump flow control valve

Slow closing effectively prevents water hammer.

Stop pump stable and save energy

Full port, small fluid resistance

Completely Automatic Operation

Pump Control Valve Working Principle

When the pump is started, the solenoid pilot valve is fully opened after electrification, and adjust the needle valve to the appropriate opening degree, upstream water enters the main valve control room through the pipe and flows out through the solenoid pilot valve, at this point, the pressure of the main valve control room keeps the main valve open and at the appropriate opening degree to keep the normal water supply downstream. When the water pump stops working, the solenoid pilot valve closed after power is cut off, the main valve control room stops to drain, the pressure of the control room rise, the main valve begins to close. When close to 90% position, the upper routing switch of the main valve outputs the stop signal and the pump stops running. At this point, the downstream backwater enters the main valve control room through the pilot pipe, the pressure of the control room increases to close the main valve.

Pump Control Valve Installation and Commissioning

The water pump pressure control valveshall be installed at the outlet of the pump and shall be installed on the pipeline of the one-way flow of the medium. It does not need other devices and energy except using solenoid pilot valve control. For specific use, please consult ZECO Valve Group.

Pump Control Valve Material and Standard

Size Range: 2"~24"

Pressure Rating: 10bar ~ 25bar

Face to Face Dimensions: AMSE B16.10, EN558-1

Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2

Coating: Fusion Bonded Epoxy Coating

Inspection and Test: ISO 5208 / EN 12226-2

Part	Material	Standard
Body	Ductile Iron	EN 1563/DIN 1693
Bonnet	Ductile Iron	EN 1563/DIN 1693
Trim	Stainless Steel 431	EN10088-1/ASTM A959
Seat	Stainless Steel 431	EN10088-1/ASTM A959
Diaphragm	EPDM / NBR	ISO 4633
Pilot Valve	CuZn39Pb1 / C37000	EN12167/ASTM B135
For the materials options not listed, consult factory. ZECO manufactures valves in more than 50 different alloys.

If you want to know more details of pump control valve operationand pump control valve function, please visit our website.

As a water valve supplier, we can offer kinds of water valvefor sale, if you have needs, please contact us.

Другие товары поставщика

	Backflow Preventers(Low Pressure)	Basic informationThis valve can strictly prevent the occurrence of backflow pollution, is a safe device to ensure the hygiene of drinking water. Fe...
	Wedge Gate Valve	Description Wedge gate valve is a linear motion, multi-turn general service valve. Table of Contents Gate valve Types as per Type of Closing E...
	6 Inch Ball Valve	Description of 6 Inch Ball Valve: ZECO Valve Group is a well-known ball valve manufacturer in China.Since its establishment in 1991, it has been pr...
	Foot Valve	Basic information of Foot Valve This valve is installed at the bottom of the pump's underwater pipette, restricting the return of the liquid to the...
	6 Inch Valve	6 water valveis commonly used with flanged gate valves and various upper valves for water, including dirt separator.Features of ZECO collector:1. T...

Все товары поставщика

Похожие товары

	Клапан	Продавец: RongTengXinNuo(Tianjin) International Trade Co.,Ltd	Клапан
	Class 300 Valve	Продавец: GangYe Group Co.,Ltd.	Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
	Class 3000 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
	Class 2500 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
	Class 150 Valve	Продавец: GangYe Group Co.,Ltd.	globe valve class 150is a pressure rating designation defined by standards organizations, such as...