Pump Control Valve
This valve is installed at the outlet of the water pump. It can prevent the backflow of the medium, linked with the water pump, and can effectively prevent the water hammer phenomenon.
Festures of pump flow control valve
Slow closing effectively prevents water hammer.
Stop pump stable and save energy
Full port, small fluid resistance
Completely Automatic Operation
Pump Control Valve Working Principle
When the pump is started, the solenoid pilot valve is fully opened after electrification, and adjust the needle valve to the appropriate opening degree, upstream water enters the main valve control room through the pipe and flows out through the solenoid pilot valve, at this point, the pressure of the main valve control room keeps the main valve open and at the appropriate opening degree to keep the normal water supply downstream. When the water pump stops working, the solenoid pilot valve closed after power is cut off, the main valve control room stops to drain, the pressure of the control room rise, the main valve begins to close. When close to 90% position, the upper routing switch of the main valve outputs the stop signal and the pump stops running. At this point, the downstream backwater enters the main valve control room through the pilot pipe, the pressure of the control room increases to close the main valve.
Pump Control Valve Installation and Commissioning
The water pump pressure control valveshall be installed at the outlet of the pump and shall be installed on the pipeline of the one-way flow of the medium. It does not need other devices and energy except using solenoid pilot valve control. For specific use, please consult ZECO Valve Group.
Pump Control Valve Material and Standard
Size Range: 2"~24"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
|
Part |
Material |
Standard |
|
Body |
Ductile Iron |
EN 1563/DIN 1693 |
|
Bonnet |
Ductile Iron |
EN 1563/DIN 1693 |
|
Trim |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
Seat |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
Diaphragm |
EPDM / NBR |
ISO 4633 |
|
Pilot Valve |
CuZn39Pb1 / C37000 |
EN12167/ASTM B135 |
|
For the materials options not listed, consult factory. ZECO manufactures valves in more than 50 different alloys. |
||
If you want to know more details of pump control valve operationand pump control valve function, please visit our website.
As a water valve supplier, we can offer kinds of water valvefor sale, if you have needs, please contact us.
Send product request
Other supplier products
 |
Flange Globe Valve | Description of Flange Globe Valve: ZECO forged globe valvescan be divided according to the location of the stem thread. Flange globe stop valveste... |
 |
Stainless Steel Gate Valve | Categories: Gate Valve, Gate Valve By Material Tag: OS&Y Valve Description ZECO Valve supplies china stainless steel gate valves in the ve... |
 |
6 Inch Valve 1025 | 6 inch water valveis commonly used with flanged gate valves and various upper valves for water, including dirt separator.Features of ZECO collector... |
 |
Electric Gate Valve | Description of Electric Gate Valve: ZECO electric gate valve is a gate valve controlled by an electric actuator. It can operate the gate valve remo... |
 |
Top Entry Ball Valve | Description Due to the distinctive nature of the environmental conditions and operating conditions of the process, a typical ball valve is not suf... |
Same products
 |
Combination angle valve | Seller: Zhejiang Huaqi Information Technology Co., LTD | Meet our Brass Angle Ball Valve, a versatile and reliable solution for controlling fluid flow in ... |
 |
Multifunctional hydraulic control valve | Seller: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD | Features: Size: 2"-24”(DN50-DN600) Material: Ductile iron ASTM A536, 65-45-12 Dimension:... |
 |
Fire Protection Grooved Butterfly Valve | Seller: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD | Features: Code：D81X4 Size: 2"-12”(DN50-DN300) Material: Ductile iron ASTM A536, 65-45-12... |
 |
Dry Ash Gate Valve | Seller: China Valve Industry Co., Ltd. | The dry ash gate valve is designed for both inlet and outlet pipelines. It features... |
 |
China factory High temperature double head bolt 2""-8UN Steam Turbine RSV N for power station | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory High temperature double head bolt 2""-8UN Steam Turbine RSV N for power stationOur... |
