Pump Control Valve
This valve is installed at the outlet of the water pump. It can prevent the backflow of the medium, linked with the water pump, and can effectively prevent the water hammer phenomenon.
Festures of pump flow control valve
Slow closing effectively prevents water hammer.
Stop pump stable and save energy
Full port, small fluid resistance
Completely Automatic Operation
Pump Control Valve Working Principle
When the pump is started, the solenoid pilot valve is fully opened after electrification, and adjust the needle valve to the appropriate opening degree, upstream water enters the main valve control room through the pipe and flows out through the solenoid pilot valve, at this point, the pressure of the main valve control room keeps the main valve open and at the appropriate opening degree to keep the normal water supply downstream. When the water pump stops working, the solenoid pilot valve closed after power is cut off, the main valve control room stops to drain, the pressure of the control room rise, the main valve begins to close. When close to 90% position, the upper routing switch of the main valve outputs the stop signal and the pump stops running. At this point, the downstream backwater enters the main valve control room through the pilot pipe, the pressure of the control room increases to close the main valve.
Pump Control Valve Installation and Commissioning
The water pump pressure control valveshall be installed at the outlet of the pump and shall be installed on the pipeline of the one-way flow of the medium. It does not need other devices and energy except using solenoid pilot valve control. For specific use, please consult ZECO Valve Group.
Pump Control Valve Material and Standard
Size Range: 2"~24"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
|
Part |
Material |
Standard |
|
Body |
Ductile Iron |
EN 1563/DIN 1693 |
|
Bonnet |
Ductile Iron |
EN 1563/DIN 1693 |
|
Trim |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
Seat |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
Diaphragm |
EPDM / NBR |
ISO 4633 |
|
Pilot Valve |
CuZn39Pb1 / C37000 |
EN12167/ASTM B135 |
|
For the materials options not listed, consult factory. ZECO manufactures valves in more than 50 different alloys. |
||
If you want to know more details of pump control valve operationand pump control valve function, please visit our website.
As a water valve supplier, we can offer kinds of water valvefor sale, if you have needs, please contact us.
在线联系供应商
Other supplier products
 |
Backflow Preventers | Basic informationThis underground gate valveis used as a two-way closed circuit device.Features1. No need for sluice Wells, which reduces the amoun... |
 |
Balancing Valve | ZhengFeng is currently the only manufacturer in China with accurate KV data and support debugging services. We have our own dynamic water testing s... |
|
|
Double Offset Butterfly Valve | Double offset butterfly valve manufacturersare further improved on the basis of single eccentric butterfly valves and are widely used. Its structur... |
 |
56 Inch Ball Valve | Description of 56 Inch Ball Valve: The largest size ball valve produced by ZECO is 56 inch, and it has its own mold, which can catch up with users'... |
|
|
Flanged Concentric Butterfly Valve | Basic information This valve offlanged butterfly valve manufacturersis used in various service and drain lines as truncation and regulating equipme... |
Same products
 |
Belaz Dump Truck Parts | 卖方: XINGTAI ME MINING EQUIPMENT CO.,LTD. | Belaz Dump Truck Parts Spare Parts-China Manufacturer and Supplier XTME offers a comprehens... |
 |
Komatsu Dump Truck Parts | 卖方: XINGTAI ME MINING EQUIPMENT CO.,LTD. | Komatsu Dump Truck Parts -China Manufacturer and Supplier 100% OEM-Compatible Spare Parts-K... |
 |
China Gate valve | 卖方: Yuanda Valve Group Co.,Ltd. | China Gate valve China Gate valve A is a type of valve that uses a gate or wedge-shaped dis... |
 |
Non Return Valve Suppliers China | 卖方: Yuanda Valve Group Co.,Ltd. | Non Return Valve Suppliers China refers to the opening and closing member for the circular v... |
 |
Ball Valve | 卖方: Yuanda Valve Group Co.,Ltd. | Ball Valve Yuanda offers Cast Iron Ball Valves JIS 10K that are essential components for flu... |
