.

UEMade Infrared Thermometer

This is a non-contact infrared thermometer applicable to body & object measurement.

Product Description

Introduction & Classification

This is a non-contact infrared thermometer applicable to body & object measurement. The thermometer measures body temperature by collecting heat radiation emitting by forehead. It's simply operational, hygeian, reliable and highly accurate. Users can get precise reading within one second by one touch. This thermometer is widely used in schools, customs, hospitals and for domestic. This thermometer is also capable of measuring object temperature ranging from 0℃-50℃. It applies to the field of agriculture, industry, food, petrochemical industry, etc. This thermometer is a internally? powered equipment. Water proof rating is: IPX0. It's prohibited to use this thermometer in flammable anesthetic gas or gas mixture of air and oxygen or nitrous oxide.

Working principle

Any object can generate certain proportion of infrared radiant energy as per its own temperature. The radiant energy and its wavelength distribution are subjected to its surface temperature. Based on this principle, this thermometer is designed to detect 9 infrared radiation at 5~14um by . By adopting this high quality sensor plus special 9 calculation and calibration, this thermometer is able to take accurate body temperature.

Features

● Adopts reliable sensor ;

● All-new & patented probe design ensures high accuracy ;

● Excellent adaption to ambient temperature. Accurate and reliable ;

● even under complicated surrounding ;

● Body mode and object mode available. One switch to change mode ;

● Beeper for high temperature ( alarm value can be defined by user) ;

● Automatic recall of last reading ;

● Large LCD with backlight ;

● ℃/℉ reading available ;

● Automatic power off ;

Technical parametersof

Measurement method

Non-contact

Effective distance

1~3cm

Range

Body

  1. ~42.9℃(89.6℉~109.2℉)

Object

0℃~50℃(32℉~122℉)

Accuracy

Body

±0.2℃/0.4℉

Object

±1℃/1.8℉

Resolution

Working condition

16℃~40℃(61℉~104℉)RH≤85% Non-condensing

Storage condition

-20℃~55℃(-4℉~131℉)RH≤93% Non-condensing

Power supply

DC3V AAA alkaline battery

Power consumption

Power off≤10uW

Measurement≤30mW

Power level indicator

Indication for low power level

Memory

32 groups

Display

LCD back-light display

Reading scale

Celsius or Fahrenheit

Automatic shut off

In 15 seconds

Dimensions

155x93x51mm

Net weight

100g

Standards

FCC 15.107, FCC 15.109, EN60601-1-2:2015,

EN61010-1:2010, 2011/65/EU and(EU)2015/863

Display & icons

Function definition

Icon

Details

Battery level

When it is visible

The battery is in low lever, but the thermometer is functional properly. Please replace battery A.S.A.P

When it Flashes

The battery is exhausted and thermometer can not function properly Please replace battery immediately

When it is invisible

Battery power is sufficient

Beeper

When it is visible

Beeper is on

When it is invisible

Beeper is off

Measurement mode

Body temp

Body mode

Body temp Don't display

Object mode

Reading scale

Celsius reading

°F

Fahrenheit reading

Reading display

Temperature value

Memory

LOG

Temperature value of last measurement

Function definition of buttons

Buttons

Description

Body/object

To switch measurement mode between human body and object

Menu

Activates menu and save setting

Increases parameter or select relevant parameter when setting parameter

Reduces parameter or select relevant parameter when setting parameter

Beeper

Beeper on/off

We are .

Setting

User can change reading scale between Celsius or Fahrenheit, switch on or switch o? beeper, set alarm value, set deviation value and change measurement mode between human body or object. Please refer to below chart.

Menu

Function

Default

Remarks

F-1

Deviation value

Decrease 0.1℃

Increase 0.1℃

0℃

Effective range: ±2℃

F-2

Alarm value setting

Decrease 0.1℃

Increase 0.1℃

38℃

Effective range: 35℃-41℃

F-3

Reading scale

Save

Save and automatic power off

Deviation value setting: F-1

Activates setting menu by pressing "MENU" button. F-1 will be displayed.

Defaulted deviation value is 0.0"C. When defaulted deviation value is twinkling.

Press "+" or "-" to increase or decrease deviation value. Deviation value will be increased or decreased by 0.1"℃" step by step.

Alarm value setting: F-2

Press MENU again to save the setup and F-2 will be displayed.

Defaulted value "38.0℃" will be displayed . Press "十" or " " to increase or decrease alarm value. Value will be increased or decreased by 0.1℃ step by step.

Reading scale setting: F-3

Press "MENU" again to save the setup and F?3 will be displayed.

Press "+" to select Fahrenheit °F as temp unit (icon '°F' is twinkling), or press "?" to select centigrade ℃ as temp unit (icon '℃' is twinkling).

Measurementsof

● Press measurement button to turn on thermometer and it displays boot screen.

● After POST and one beeps, it will display value of last reading and be ready for measurement.

● Make sure the thermometer is under body mode.

● Keep distance at 1cm to 3cm from upper eyebrows to the probe . Press measurement button and when it gives a "beep measurement is finished and value will be displayed.

● If measurement value is exceeding alarm value(Defaulted value is 38℃), it gives " beep. beep. beep. beep." as a indication.

● After measurement, if the thermometer is idle in 15 seconds, it will power off automatically.

Notice:

● Press measurement button to turn on thermometer.

● Make sure the thermometer is under object mode.

● Keep vertical distance at 5cm to 8cm from object to measurement probe. Press measurement button and when it gives a "beep" measurement is finished and value will be displayed.

● After measurement, if the thermometer is idle in 15 seconds.it will power off automatically.

Notice:

Body mode:

● When measurement value is lower than 35.0°C, it displays Lo and gives“beep. beep. beep. beep".

● When measurement value is higher than 42.9°C, it displays Hi and gives "beep. beep. beep. beep".

Object mode:

● When measurement value is lower than 0°C, it displays Lo and gives "beep. beep. beep. beep".

● When measurement value is higher than 50.0 °C, it displays Hi and gives "beep. beep. beep. beep".

Notice:

When surrounding temperature is lower than 16.0°C or higher than 40.0 °C, it displays Err. It's not allowed to measure or accuracy is not assured.

● Open the battery lid and take out exhausted battery.

● Put into AAA alkaline batteries and close up battery lid. After new battery is installed, thermometer will give“Beep.Beep' If there's no beeps, check if the positive and negative pole is correct

Notice:

Make sure the sensor and probe cavity is clean otherwise it will affect accuracy. Cleaning method for probe:

surface or probe cavity gently. Don't use thermometer before

● Read this manual thoroughly before use. Make sure battery is well installed.

● It is not allowed to put the thermometer in any liquid or expose to strong sunlight or extremely low temperature

● Strong crash or hit to the product will cause its damage

● Do not dismantle this thermometer by yourself.

● Keep the thermometer from children's reach.

● Do not use the thermometer under circumstance of strong electromagnetic interfere.

● The measurement results are probably fluctuating due to improper measurement ways. Please practice adequate measurements in order to improve your skill.

● The measurement results can not supersede a doctor's diagnosis.

● Special maintenance is unnecessary for this thermometer. Please contact distributor or manufacturer in case of malfunction.

Measurements

Description

Solutions

"LLCOD" doisrp "laHyI"

from high ‒temp object to very low—temp so enormously or

if the thermometer is used temp one, the measurement

difference will happen.The thermometer should be kept in a

relative stable environment for 10 minutes to get heat balance

before starting a new measurement.

No response when pressing measurement button

of menu setting, thermom

No display or improper display

Take out battery and install batteries again.

No beeper

Check if the beeper is switched off.

Shut off right after switching

Check battery level or take out and install the battery again.

Quality commitment & after-sale

One year guarantee is available since purchasing.

Any damage caused by illegal use or product disassemble will not be covered by guarantee.



Отправить запрос, связаться с поставщиком

Кому: WelMade Technology (ShenZhen) Co.,Ltd
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Non-contact Infrared Thermometer
Non-contact Infrared Thermometer This product measures the body temperature by collecting the infrared thermal radiation from the forehead of the target parties. Product Descr...
UEMade Infrared Thermometer
UEMade Infrared Thermometer This is a non-contact infrared thermometer applicable to body & object measurement. Product Description Introduction & Classification...
Pulse Oximeter
Pulse Oximeter SpO2 value display Product Description Major Features ● SpO2 value display ● Pulse rate value display, bar graph display ● Pulse waveform ...
KN95 Protective Mask
KN95 Protective Mask [Product Name]: KN95 Anti Particulate face mask Product Description [Main Material]: Non-woven fabric, melt-blown cloth, ES filter cotton ...
Disposable Protective Mask
Disposable Protective Mask Norms on the basis of quality as a fundamental to provide a safe and effective product is Calvin unswerving pursuit! Product Description Qu...
Все товары поставщика

Похожие товары

Non Contact Infrared Thermometer
Non Contact Infrared Thermometer Продавец: Jiangxi AICARE Medical Technology Co., Ltd. PRODUCT DESCRIPTION Careful and accurate temperature measurement Relieved measurement | non-con...
Non-contact Infrared Thermometer
Non-contact Infrared Thermometer Продавец: WelMade Technology (ShenZhen) Co.,Ltd This product measures the body temperature by collecting the infrared thermal radiation from th...
UEMade Infrared Thermometer
UEMade Infrared Thermometer Продавец: WelMade Technology (ShenZhen) Co.,Ltd This is a non-contact infrared thermometer applicable to body & object measurement. Prod...
Digital Infrared Forehead Thermometer Medical Fever Body Thermometer Hospital Thermometer
Digital Infrared Forehead Thermometer Medical Fever Body Thermometer Hospital Thermometer Продавец: Basen Industry Co.,Ltd PRODUCT DESCRIPTION Brand Name: BASEN Products name:Digital Infrared Forehead Thermometer Medica...
Non-contact digital thermometer
Non-contact digital thermometer Продавец: Ningbo Shengjing Commercial & Trading Co., Ltd. Product model LRC-168A Measure distance 3-5cm Accuracy ±0.2℃ Measu...