UEMade Infrared Thermometer

This is a non-contact infrared thermometer applicable to body & object measurement.

Product Description

Introduction & Classification

This is a non-contact infrared thermometer applicable to body & object measurement. The thermometer measures body temperature by collecting heat radiation emitting by forehead. It's simply operational, hygeian, reliable and highly accurate. Users can get precise reading within one second by one touch. This thermometer is widely used in schools, customs, hospitals and for domestic. This thermometer is also capable of measuring object temperature ranging from 0℃-50℃. It applies to the field of agriculture, industry, food, petrochemical industry, etc. This thermometer is a internally? powered equipment. Water proof rating is: IPX0. It's prohibited to use this thermometer in flammable anesthetic gas or gas mixture of air and oxygen or nitrous oxide.

Working principle

Any object can generate certain proportion of infrared radiant energy as per its own temperature. The radiant energy and its wavelength distribution are subjected to its surface temperature. Based on this principle, this thermometer is designed to detect 9 infrared radiation at 5~14um by . By adopting this high quality sensor plus special 9 calculation and calibration, this thermometer is able to take accurate body temperature.

Features

● Adopts reliable sensor ;

● All-new & patented probe design ensures high accuracy ;

● Excellent adaption to ambient temperature. Accurate and reliable ;

● even under complicated surrounding ;

● Body mode and object mode available. One switch to change mode ;

● Beeper for high temperature ( alarm value can be defined by user) ;

● Automatic recall of last reading ;

● Large LCD with backlight ;

● ℃/℉ reading available ;

● Automatic power off ;

Technical parametersof

Measurement method	Non-contact
Effective distance	1~3cm
Range	Body	～42.9℃（89.6℉～109.2℉）
	Object	0℃～50℃（32℉~122℉）
Accuracy	Body	±0.2℃/0.4℉
	Object	±1℃/1.8℉
Resolution
Working condition	16℃～40℃(61℉~104℉)RH≤85% Non-condensing
Storage condition	-20℃～55℃(-4℉～131℉)RH≤93% Non-condensing
Power supply	DC3V AAA alkaline battery
Power consumption	Power off≤10uW
	Measurement≤30mW
Power level indicator	Indication for low power level
Memory	32 groups
Display	LCD back-light display
Reading scale	Celsius or Fahrenheit
Automatic shut off	In 15 seconds
Dimensions	155x93x51mm
Net weight	100g
Standards	FCC 15.107, FCC 15.109, EN60601-1-2:2015, EN61010-1:2010, 2011/65/EU and(EU)2015/863

Display & icons

Function definition	Icon	Details
Battery level		When it is visible	The battery is in low lever, but the thermometer is functional properly. Please replace battery A.S.A.P
		When it Flashes	The battery is exhausted and thermometer can not function properly Please replace battery immediately
		When it is invisible	Battery power is sufficient
Beeper		When it is visible	Beeper is on
		When it is invisible	Beeper is off
Measurement mode	Body temp	Body mode
	Body temp Don't display	Object mode
Reading scale	℃	Celsius reading
	°F	Fahrenheit reading
Reading display		Temperature value
Memory	LOG	Temperature value of last measurement

Function definition of buttons

Buttons	Description
Body/object	To switch measurement mode between human body and object
Menu	Activates menu and save setting
	Increases parameter or select relevant parameter when setting parameter
	Reduces parameter or select relevant parameter when setting parameter
Beeper	Beeper on/off

We are .

Setting

User can change reading scale between Celsius or Fahrenheit, switch on or switch o? beeper, set alarm value, set deviation value and change measurement mode between human body or object. Please refer to below chart.

Menu	Function			Default	Remarks
F-1	Deviation value	Decrease 0.1℃	Increase 0.1℃	0℃	Effective range: ±2℃
F-2	Alarm value setting	Decrease 0.1℃	Increase 0.1℃	38℃	Effective range: 35℃-41℃
F-3	Reading scale	℃	℉	℃
Save	Save and automatic power off

Deviation value setting: F-1

Activates setting menu by pressing "MENU" button. F-1 will be displayed.

Defaulted deviation value is 0.0"C. When defaulted deviation value is twinkling.

Press "+" or "-" to increase or decrease deviation value. Deviation value will be increased or decreased by 0.1"℃" step by step.

Alarm value setting: F-2

Press MENU again to save the setup and F-2 will be displayed.

Defaulted value "38.0℃" will be displayed . Press "十" or " " to increase or decrease alarm value. Value will be increased or decreased by 0.1℃ step by step.

Reading scale setting: F-3

Press "MENU" again to save the setup and F?3 will be displayed.

Press "+" to select Fahrenheit °F as temp unit (icon '°F' is twinkling), or press "?" to select centigrade ℃ as temp unit (icon '℃' is twinkling).

Measurementsof

● Press measurement button to turn on thermometer and it displays boot screen.

● After POST and one beeps, it will display value of last reading and be ready for measurement.

● Make sure the thermometer is under body mode.

● Keep distance at 1cm to 3cm from upper eyebrows to the probe . Press measurement button and when it gives a "beep measurement is finished and value will be displayed.

● If measurement value is exceeding alarm value(Defaulted value is 38℃), it gives " beep. beep. beep. beep." as a indication.

● After measurement, if the thermometer is idle in 15 seconds, it will power off automatically.

Notice:

● Press measurement button to turn on thermometer.

● Make sure the thermometer is under object mode.

● Keep vertical distance at 5cm to 8cm from object to measurement probe. Press measurement button and when it gives a "beep" measurement is finished and value will be displayed.

● After measurement, if the thermometer is idle in 15 seconds.it will power off automatically.

Notice:

Body mode:

● When measurement value is lower than 35.0°C, it displays Lo and gives“beep. beep. beep. beep".

● When measurement value is higher than 42.9°C, it displays Hi and gives "beep. beep. beep. beep".

Object mode:

● When measurement value is lower than 0°C, it displays Lo and gives "beep. beep. beep. beep".

● When measurement value is higher than 50.0 °C, it displays Hi and gives "beep. beep. beep. beep".

Notice:

When surrounding temperature is lower than 16.0°C or higher than 40.0 °C, it displays Err. It's not allowed to measure or accuracy is not assured.

● Open the battery lid and take out exhausted battery.

● Put into AAA alkaline batteries and close up battery lid. After new battery is installed, thermometer will give“Beep.Beep' If there's no beeps, check if the positive and negative pole is correct

Notice:

Make sure the sensor and probe cavity is clean otherwise it will affect accuracy. Cleaning method for probe:

surface or probe cavity gently. Don't use thermometer before

● Read this manual thoroughly before use. Make sure battery is well installed.

● It is not allowed to put the thermometer in any liquid or expose to strong sunlight or extremely low temperature

● Strong crash or hit to the product will cause its damage

● Do not dismantle this thermometer by yourself.

● Keep the thermometer from children's reach.

● Do not use the thermometer under circumstance of strong electromagnetic interfere.

● The measurement results are probably fluctuating due to improper measurement ways. Please practice adequate measurements in order to improve your skill.

● The measurement results can not supersede a doctor's diagnosis.

● Special maintenance is unnecessary for this thermometer. Please contact distributor or manufacturer in case of malfunction.

Measurements

Description	Solutions
"LLCOD" doisrp "laHyI"	from high ‒temp object to very low—temp so enormously or if the thermometer is used temp one, the measurement difference will happen.The thermometer should be kept in a relative stable environment for 10 minutes to get heat balance before starting a new measurement.
No response when pressing measurement button	of menu setting, thermom
No display or improper display	Take out battery and install batteries again.
No beeper	Check if the beeper is switched off.
Shut off right after switching	Check battery level or take out and install the battery again.

Quality commitment & after-sale

One year guarantee is available since purchasing.

Any damage caused by illegal use or product disassemble will not be covered by guarantee.

Other supplier products

	Pulse Oximeter	SpO2 value display Product Description Major Features ● SpO2 value display ● Pulse rate value display, bar graph display ● Pulse waveform ...
	UEMade Infrared Thermometer	This is a non-contact infrared thermometer applicable to body & object measurement. Product Description Introduction & Classification...
	Disposable Protective Mask	Norms on the basis of quality as a fundamental to provide a safe and effective product is Calvin unswerving pursuit! Product Description Qu...
	KN95 Protective Mask	[Product Name]: KN95 Anti Particulate face mask Product Description [Main Material]: Non-woven fabric, melt-blown cloth, ES filter cotton ...
	Non-contact Infrared Thermometer	This product measures the body temperature by collecting the infrared thermal radiation from the forehead of the target parties. Product Descr...

供应产品

Same products

	Thermistor	卖方: Shenzhen Temp-sen sensor Co., LTD	Temperature Sensor For Home Appliance For Pellet Grill For Food For Instrumentation For Pet Box &...
	SMD Thermistor	卖方: Shenzhen Temp-sen sensor Co., LTD	Details Material: Semiconductor ceramics Applicable temperature range：-40~120℃ Output signal: a...
	Non Contact Infrared Thermometer	卖方: Jiangxi AICARE Medical Technology Co., Ltd.	PRODUCT DESCRIPTION Careful and accurate temperature measurement Relieved measurement | non-con...
	Non-contact Infrared Thermometer	卖方: WelMade Technology (ShenZhen) Co.,Ltd	This product measures the body temperature by collecting the infrared thermal radiation from th...
	UEMade Infrared Thermometer	卖方: WelMade Technology (ShenZhen) Co.,Ltd	This is a non-contact infrared thermometer applicable to body & object measurement. Prod...