ASTM E1354 Cone Calorimeter for Building Materials
Все товары поставщика
ASTM E 1354Method of test for heat and smoke release rates for materials and products using an Oxygen Consumption Calorimeter
BS 476 Pt.15Fire tests on building materials and structures-Part 15: Methods for measuring the rate of heat release of products.
GB/T 16172-2007Method of test for heat release rate of building materials.
NFPA 264Standard method of test for heat and visible smoke release rates for materials and products using an oxygen consumption calorimeter
1、 10kV spark lighter with safe fire-off device. The lighter automatically detect its position via the lever which connects to the closing mechanism.
2、System automatic ignition, automatic timing, automatic gas closing and fire-off.
B、Exhaust system
1、Made up of axial flow fan, stainless steel exhaust pipe, diffusion plate, smoke collecting cover, exhaust pipe, orifice plate flow meter and thermometer.
2、 Stainless steel, long service life, including the cover, gas sampling needle, exhaust fan.
C、Gas sampling system
1、Including the ring sampler, getter pump, particle filter, cold trap, exhaust valve, water filter and filter of CO2.
2、Three-stage filtration at an precision of 0.5um.
3、Freezing cold trap, air-conditioning refrigeration system, control the temperature of 0 ~ 5 ℃
4、Sampler has 12 pores opposite to the direction of air flow. Built-in dust filter is 685mm away from the smoke collecting cover.
D、Measuring system
1、Paramagnetic oxygen analyzer, range 0-25%; British imported SERVOMEX oxygen sensor, linear response.
2、 Smoke density is measured with a laser system.
3、High precision load sensor measures the weight change of sample material during testing process.
4、Temperature control system: PID temperature control, three thermocouples measure radiation cone temperature.
E、User operating system
1、Laboratory used professional Labwiew control system, user friendly, easy to operate, precise control.
2、PID temperature control module is linked with power adjusting module. Programmable controller adjust the thermostat control.
3、Signal acquisition and processing module is linked with the air flow circuit control module through the programmable logic controller to calculate the output, intelligent adjustment of the preset wind speed. The system provides the query function. The system will automatically make sample serial number and store the serial number and temperature curve in the database within the system, and can be inquired by entering the sample number, test date, etc.
The test theory of the cone calorimeter is based on the fact that the amount of pure combustion calories are proportional to the amount of oxygen burned. Combustion of each 1kg of oxygen will produce 13.1MJ / kg of gas. Parameters such as the heat emissions, ignition time, oxygen consumption rate, production rate of CO and CO2, gas flow, will be measured.
1. 19" standard cabinet integrated design, nice, easy to operate.
2. cone heater - in the truncated cone, 230V, 5000W, heat output is 0 ~ 120 kW / m2.
3. 19 "touch screen computer to control the entire test process.
4. automatic ignition system, automatic measurement of burning time.
5. 3 K-type thermocouples and PID temperature controller to control the temperature in 3 periods.
6. automatic split gate -protect the sample area before the test to ensure the initial quality measurement is stable. The operator can have extra time to run system testing before the start of the test. For flammable samples, if there is no opening and closing mechanism, it is easy to burn at earlier time. This extra time is very important to the operator.
7. sample holder - sample size 100mm x 100mm, thickness of no more than 50mm.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
45 degree flammability tester | Testing Standards:ASTM D1230, FTMS 191-5908, CFR 16 Part 1610, CALIF TB 117, NFPA 702, GB/T 14644Applications:45 degree flammability tester is desi... |
 |
Face Mask Airflow Respiratory resistance tester | Disposable mask airflow resistance tester can be used to determine the inspiratory and expiratory resistance of masks under specified conditions.An... |
 |
Bally Type Flexometer | Bally Type Flexometer 6-12-24 Working Places Standards: EN ISO 20344:6.6, I.U.P.10+20, I.U.P.20, UNI 4818, DIN 53.351, UNE/I.U.P.20 Applicatio... |
 |
Testing instrument for medical face mask particle protection effect meter | The tester is used for performance testing of filter elements, disposable masks, filter media, etc. forFilter performance tester ofrespirator.It's ... |
 |
fabric surface wetting resistance tester | Water Repellency Tester is used to check the water repellency of the fabric by spray test in textile testing laboratory. Suitable for Table cloth, ... |
Похожие товары
 |
Роликовый кронштейн для тринокулярного стереомикроскопа серии RF4 | Продавец: С. так потрясена, что Technology Co.,Ltd. | RF4 RF-FX23A RF-FX35A Тринокулярный микроскоп с 7-50-кратным непрерывным зумом и складным кронште... |
 |
RELIFE RL-M6T Pro B11 6.5X-65X Trinocular Stereo Microscope | Продавец: Phonefix | RELIFE RL-M6T Pro-B11 6.5X-65X Continuous Zoom Trinocular Stereo Microscope with B11 large area b... |
 |
Smoke Toxicity Tester | Продавец: Тысяча сплошная точный электромеханический прибор контрольно-измерительной ЛТД | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi ... |
 |
Surface Flammability Tester | Продавец: Тысяча сплошная точный электромеханический прибор контрольно-измерительной ЛТД | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi ... |
 |
Smoke Alarm Test Tunnels | Продавец: Тысяча сплошная точный электромеханический прибор контрольно-измерительной ЛТД | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi ... |
