Маска BFE тест
Все товары поставщика
Bacterial Filtration Efficiency Tester is to determine the bacterial filtration efficiency (BFE) of medical face mask materials by employing a ratio of the upstream bacterial challenge to downstream residual concentration of the tested medical face mask materials. The control console adopts microcomputer control system to coordinate and control the work of aerosol generation system, transmission system, negative pressure cabinet and sampling system, and display the working status in real time. The whole measurement work is completed automatically.
Mask Bacterial Filtration Efficiency Tester Standards:
YY 0469-2004 Technical requirements for surgical mask
BS EN 14683-2014 Medical face masks - Requirements and test methods
ASTM F2100-2019 Standard Specification for Performance of Materials Used in Medical Face Masks
ASTM F2101 Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus.
| Cabinet negative pressure | Data can be downloaded via usb flash drive |
| Data storage capacity | Data can be downloaded via usb flash drive |
| mass flow controller | 0-20L/min,resolution:0.1 L/min |
| Peristaltic pump flow | (0.01~3.0)mL/min |
| High efficiency air filter characteristics | The filtration efficiency of particles above 0.3um is≥99.99% |
| Median mass diameter of aerosol generator | The average particle diameter was(3.0±0.3)μm,Geometric standard deviation≤1.5 |
| Two-channel 6-stage Anderson sampler captures particle size | Ⅰclass>7μm,class(4.7~7)μm,Ⅲ class(3.3~4.7)μm,class(2.1~3.3)μm,class(1.1~2.1)μm,class(0.6~1.1)μm |
| Fog chamber specifications | (600×80×5)mm |
| Total number of positive quality control sampler particles | (2200±500)cfu |
| Ventilation flow of negative pressure system | 800m³/min |
| Operation room dimension | (740×940×440)mm |
| dimension | About 1200×650×2100mm |
| Instrument noise | <65Db(A) |
| weight | 120kg |
| power consumption | <1500W |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Hot Pressing Sublimation Colorfastness Tester | IntroductionHot pressing sublimation color fastness tester is used for determination of color fastness performance to hot pressing ironing ... |
 |
Fabric Negative-ion Concentration Tester | The negative ion generation tester is mainly used to detect the negative ion generation of textiles, and evaluate the negative ion generation capac... |
 |
Textile Grease Extraction Apparatus | Rapid Grease Extraction Apparatus Testing Standards ofRapid Grease Extraction Apparatus: Edana method ERT 155 Applications: Rapid Grease Extraction... |
 |
JIS L Rubbing Colour Fastness Test machine conform to JIS L0849 | The rubbing color fastness tester is a standard testing machine of the Type II rubbing tester (GAKUSIN TYPE) specified in JIS L0849 Test Method of ... |
 |
Tape abrasion tester | The RCA Abrasion Wear Tester is used to test surfaces for resistance to abrasion and wear. Typically used on painted or plated organic finishes, fo... |
Похожие товары
 |
Цифровой мультиметр Fluke 15B+ 17B+ 18B+, тестер напряжения и частоты | Продавец: Шэньчжэнь Weike Repair Technology Co., Ltd. | Полупрозрачная/полностью прозрачная/молочно-белая/светло-желтая паяльная паста iFixes 10CC， не со... |
 |
HTT-02 Hot Tack Tester | Продавец: Cell Instruments Co., Ltd | The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren... |
 |
SPC-01 Stretch Film Peeling Cling Tester | Продавец: Cell Instruments Co., Ltd | The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f... |
 |
FTT-01 Film Thickness Tester | Продавец: Cell Instruments Co., Ltd | The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness ... |
 |
TST-01 Tensile Tester | Продавец: Cell Instruments Co., Ltd | TST-01 tensile testers are suitable for conducting a variety of tests, including tensile strength... |
