口罩过滤效率测试仪
Bacterial Filtration Efficiency Tester is to determine the bacterial filtration efficiency (BFE) of medical face mask materials by employing a ratio of the upstream bacterial challenge to downstream residual concentration of the tested medical face mask materials. The control console adopts microcomputer control system to coordinate and control the work of aerosol generation system, transmission system, negative pressure cabinet and sampling system, and display the working status in real time. The whole measurement work is completed automatically.
Mask Bacterial Filtration Efficiency Tester Standards:
YY 0469-2004 Technical requirements for surgical mask
BS EN 14683-2014 Medical face masks - Requirements and test methods
ASTM F2100-2019 Standard Specification for Performance of Materials Used in Medical Face Masks
ASTM F2101 Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus.
| Cabinet negative pressure | Data can be downloaded via usb flash drive |
| Data storage capacity | Data can be downloaded via usb flash drive |
| mass flow controller | 0-20L/min,resolution:0.1 L/min |
| Peristaltic pump flow | (0.01~3.0)mL/min |
| High efficiency air filter characteristics | The filtration efficiency of particles above 0.3um is≥99.99% |
| Median mass diameter of aerosol generator | The average particle diameter was(3.0±0.3)μm,Geometric standard deviation≤1.5 |
| Two-channel 6-stage Anderson sampler captures particle size | Ⅰclass>7μm,class(4.7~7)μm,Ⅲ class(3.3~4.7)μm,class(2.1~3.3)μm,class(1.1~2.1)μm,class(0.6~1.1)μm |
| Fog chamber specifications | (600×80×5)mm |
| Total number of positive quality control sampler particles | (2200±500)cfu |
| Ventilation flow of negative pressure system | 800m³/min |
| Operation room dimension | (740×940×440)mm |
| dimension | About 1200×650×2100mm |
| Instrument noise | <65Db(A) |
| weight | 120kg |
| power consumption | <1500W |
在线联系供应商
Other supplier products
 |
Button Impact Tester | Button Impact Tester Testing Standards:ASTM D5171 Applications:Button Impact Tester is used to determine the impact resistance of plastic sew-thr... |
 |
Circular trajectory method Circular Locus Pilling Tester | CircularLocusPillingTesterisusedtotestthepillingperformance,suitablefordifferentkindsoffabricincludingwovenfabricandshuttlefabric.FeatureOfCircular... |
 |
Fabric Negative-ion Concentration Tester | The negative ion generation tester is mainly used to detect the negative ion generation of textiles, and evaluate the negative ion generation capac... |
 |
Taber abrasion resistance test machine from qinsunlab | Range of application TABER abrasion resistance tester and wear resistance tester apply to the abrasion resistance performance test on fabric, cardb... |
 |
JIS L Rubbing Colour Fastness Test machine conform to JIS L0849 | The rubbing color fastness tester is a standard testing machine of the Type II rubbing tester (GAKUSIN TYPE) specified in JIS L0849 Test Method of ... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
