Mask BFE Tester
Bacterial Filtration Efficiency Tester is to determine the bacterial filtration efficiency (BFE) of medical face mask materials by employing a ratio of the upstream bacterial challenge to downstream residual concentration of the tested medical face mask materials. The control console adopts microcomputer control system to coordinate and control the work of aerosol generation system, transmission system, negative pressure cabinet and sampling system, and display the working status in real time. The whole measurement work is completed automatically.
Mask Bacterial Filtration Efficiency Tester Standards:
YY 0469-2004 Technical requirements for surgical mask
BS EN 14683-2014 Medical face masks - Requirements and test methods
ASTM F2100-2019 Standard Specification for Performance of Materials Used in Medical Face Masks
ASTM F2101 Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus.
| Cabinet negative pressure |
Data can be downloaded via usb flash drive |
| Data storage capacity |
Data can be downloaded via usb flash drive |
| mass flow controller |
0-20L/min,resolution:0.1 L/min |
| Peristaltic pump flow |
(0.01~3.0)mL/min |
| High efficiency air filter characteristics |
The filtration efficiency of particles above 0.3um is≥99.99% |
| Median mass diameter of aerosol generator |
The average particle diameter was(3.0±0.3)μm,Geometric standard deviation≤1.5 |
| Two-channel 6-stage Anderson sampler captures particle size |
Ⅰclass>7μm,class(4.7~7)μm,Ⅲ class(3.3~4.7)μm,class(2.1~3.3)μm,class(1.1~2.1)μm,class(0.6~1.1)μm |
| Fog chamber specifications |
(600×80×5)mm |
| Total number of positive quality control sampler particles |
(2200±500)cfu |
| Ventilation flow of negative pressure system |
800m³/min |
| Operation room dimension |
(740×940×440)mm |
| dimension |
About 1200×650×2100mm |
| Instrument noise |
<65Db(A) |
| weight |
120kg |
| power consumption |
<1500W |
Other supplier products
|
|
Fabric Heat Conduction Performance Tester |
标准：
EN 367-1992？防护服-防热和防火-测试方法：测定暴露于火焰时的热传递率
应用：
产品信息：
该仪器主要用于纺织品、消防用品等材料热导率的测定。特点： ◆仪器能数字显示火焰温度、测量温度、时间。◆燃烧器配有适用于燃烧石油液化气的火焰喷嘴，气孔分布... |
|
|
Shoe Bending Stiffness Tester |
Shoes Bending Stiffness Tester is used to measure bending resistance of whole shoes (France shoe Size 39, 42,and British shoe Size 6,Size 8). Clamp... |
|
|
Medical Face Masks filter material Particulate filtration efficiency tester |
Medical Face Masks filter material Particulate filtration efficiency tester
is used for performance testing of filter elements, disposable masks, ... |
|
|
Melt Flow Indexer(MFI) |
IntroductionMelt flow indexer(MFI) are used for military uniforms, canvas, canvas, labor insurance products. The fabric fusing tester is designed f... |
|
|
Washing Resistance Color Fastness Tester |
Water wash discolor test equipment, to determine color fastness to washing or dry cleaning to ISO, AATCC standards.The washing fastness tester uses... |
All supplier products
Same products
