BKNET-0102 Welded Pipe Eddy Current Flaw Detector

Eddy current weld testingis the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. At the same time, we need to be clear that the welded pipe is, in general, the steel pipe that we usually say, which is a welded steel pipe.

Eddy current testing of weldsis a non-destructive testing technique for detecting component defects by using the principle that the eddy current induced by the AC electromagnetic coil on the surface of the metal member encounters a defect. The oscillating current is generated in the conductive member by the excitation coil by the principle of electromagnetic induction, and the amount of change in the eddy current is measured by the detecting coil, thereby obtaining information on the component defect.

Eddy current weld inspectionis a non-destructive testing technique in which an alternating current electromagnetic coil induces eddy currents on the surface of a metal member. This eddy current machine is suitable for the detection of defects in conductive materials, including ferromagnetic and non-ferromagnetic metal materials.

BKNET-012 NDT weld testing equipmentis used for on-line and off-line inspection of welded pipes. It has high sensitively to axial defects such as unwelded welding, dark spots and open cracks. The eddy current testing of welds can effectively detects slow and long-term injuries caused by welder failure during the production process.

BKNET-0102 Welded Pipe Eddy Current Flaw Detector performance

Detection channel	Double channel
Detection speed	1～500m/min(online)
Frequency range	100Hz-1MHz
Gain	0～99dB, step 0.1dB
Phase rotation	0-360 °step1 °
High pass	～650Hz
Low pass	1Hz～10000Hz

BKNET-0102 Welded Pipe Eddy Current Flaw Detector Features:

High precision end and end-to-tail signal removal

High precision real-time, delayed alarm output

Fast digital／analog electronic balance

Memory track delay blanking function

Non-equal amplitude phase／amplitude alarm domain

Remote automatic help system

Synchronous alarm output for internal and external clock control

As one of ndt equipment manufacturers, we can offer sorts of ndt testingmachine for sale, if you have needs, please contact us.

Другие товары поставщика

	Automatic EDM Notch	Automatic EDM Notchis a kind of EDM notch machine, and it is the ideal equipment for processing artificial defects of pipe rod standards in non-des...
	Portable Magnetic Flux Leakage Testing Equipment	Magnetic flux leakage test refers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to defects...
	BKNET-0102 Welded Pipe Eddy Current Flaw Detector	Eddy current weld testingis the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. A...
	BKNET-0102 Welded Pipe Eddy Current Flaw Detector	Eddy current testing of welds is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossle...
	Drill Pipe Magnetic Flux Leakage Detector MFL-308	Specifications: diameter Φ73 / Φ89 mm, length 9.6m or so Detection speed: 6-20 m / min Acceptance criteria: American Petroleum Institute ...

Все товары поставщика

Похожие товары

	HTT-02 Hot Tack Tester	Продавец: Cell Instruments Co., Ltd	The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren...
	SPC-01 Stretch Film Peeling Cling Tester	Продавец: Cell Instruments Co., Ltd	The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f...
	FTT-01 Film Thickness Tester	Продавец: Cell Instruments Co., Ltd	The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness ...
	TST-01 Tensile Tester	Продавец: Cell Instruments Co., Ltd	TST-01 tensile testers are suitable for conducting a variety of tests, including tensile strength...
	HST-01 Heat Seal Tester	Продавец: Cell Instruments Co., Ltd	HST-01 HeatSeal Testeris designed for laboratory use, to assess the heat seal ability of surfaces...