Low - temperature Winding Tester for Automotive Wires
The low - temperature winding tester for automotive wires is used to assess and determine the performance of circular wire cables or circular insulated wire cores in low - temperature conditions.
Test Standards:
ISO 6722, ISO 14572, ISO 19642, SAE J1128, QC/T 730, JASOD611 - 2009, etc.
Main Parameters:
1) Low - temperature winding sample: less than 25mm² 2) Diameter of winding rod: Φ6, 8, 10, 12, 15, 18, 20, 25, 30, 32, 40, 50, 58, 62.5, 74, 82.5, 90, 98.5mm (optional) 3) Weight weights: 0.5, 2.5, 5, 8, 10kg and combined weights: 4 pieces of 10kg (Note: for large loads such as 30KG weight test, two samples are used in one group) 4) Number of winding turns of the sample: 3 turns 5) The winding rods and brackets of this series of devices are made of stainless steel.
Electric Controller of Low - temperature Winding Test Device for Automotive Wires:
1. Servo motor: 1500W 2. Controller: PLC + touch screen 3. Winding speed: up to 130 revolutions per minute (set on the touch screen) 4. The number of winding turns can be set (set on the touch screen)
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
labratory gas fume chamber | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Anti-impact Test Bench For Automobile Steering | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Fabric Ultraviolet Tester | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Scorch Tester/Sublimation fastness tester | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Liquid Resistance Tester for Automotive Wires | Test Standards: Requirements for liquid resistance tests of automotive wires in ISO 6722, SAE J1128, QC/T 730, and JASOD611 Main Parameters: T... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
