Catheter bending resistance tester
Product introduction
The tester is composed of a programmable controller, a touch screen, a force sensor,
a transmission device, an airborne printer, etc. It provides a menu display in both Chinese
and English, and has a test mode for automatic operation of various parameters set by
man-machine dialogue. Test control range includes: nominal capacity, core rod displacement,
print setting, test, up, down, time, calibration, verification and other function Settings. With
the on-board printed test, the test load and sliding data （starting force, average force,
maximum thrust） can be displayed in real time. Automatically judge the test results, start
the automatic buzzer alarm if unqualified, and print out the test data and results by the printer
for analysis.
Test principle
The loop circumference of the catheter is expressed as the bending length, and the flow
rate of the catheter drainage cavity and the irrigation cavity is measured under the bending
length, so as to reduce the initial flow rate of the corresponding cavity after the flat catheter
is placed by 50%.
Meet the standard
YY/T 0325-2016, GB/T 15812.1-2005
Technical parameter
1. Static level height: 1000±5mm, automatic circulation of water pump （adjustable
static water surface）
2. Time controller: 0-- 60min, error is not more than ±1S
3. Fixture: suitable for various catheters
4. Flow calculation: measuring cylinder method
5. Flow rate: >500ML/MIN
6. Overall size: 400×290×240（mm）
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Synthetic Blood Penetration Tester for Medical Face Mask | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Floor coverings flammability tester | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Mask Visual Field Tester | Application: Mask Visual Field Tester to determine whether field of vision under the mask meets the standard requirement or not. Standards: GB... |
 |
Strength test bench for car seat components | Applicable standards: The National Standard of the People's Republic of China （GB） : such as GB 15083, this standard specifies the strength requir... |
 |
Bag plastic plug-in fatigue testing machine | Product Introduction: It is mainly used to test the service life of plastic plug-ins in luggage accessories. Technical standard: QBT 5247-2018... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
