Guide wire friction tester
Product introduction
The guide wire friction tester is mainly used to measure the friction between the guide
wire and the guide wire. This device is of great significance for research and practice in the
medical field because it can help doctors understand the movement characteristics of the
catheter and guide wire in the human body, so as to optimize surgical procedures and
improve treatment results.
Test principle
The sample is clamped between the two chuck of the fixture, the two chuck do relative
movement, and the puncture or opening force test will be carried out through the special
chuck. Through the force sensor located on the moving clamp head and the displacement
sensor built in the machine, the change of force value and displacement in the test process
is collected, and the corresponding force value data is obtained.
Test standard
YY/T1536-2017,GB 8808, GB/T 1040.1-2006, GB/T 1040.2-2006, GB/T 1040.3-2006,
GB/T 1040.4-2006, GB/T 2791,GB/T 1040.5-2008,GB/T 12914-2008, GB/T 17200,
GB/T 16578.1-2008, GB/T 2790, GB/T 2792, GB/T 17590, GB/T 4850-2002,QB/T 2358,
QB/T 1130, GB/T 7122,ISO 37, ASTM D882, ASTM E4, ASTM D3330, ASTM F904,ASTM F88,
ASTM D1938.
Technical parameter
1. Test range: 0-500N （50N, 100N, 200N, 1000N other ranges are optional）
2. Measurement accuracy: 0.5 level
3. Travel: 800mm
4. Test speed: 0.5-500mm/min stepless transmission
5. Displacement accuracy: 0.01mm
6. Sample quantity: 1 piece
7. Chuck size: 0-30mm
8. Shape: 450mm（L）× 500mm（B）× 1500mm（H）
9. Weight: 75kg
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Helmet Xenon Aging Tester | Standards GB/T2014-9-19. ISO 4892 ASTM G151. G154. D4329 d4587、d4799、sae j2020 Xenon lamp aging test box structure 1. the box is molded by CNC... |
 |
Glow wire tester | F242 Glow-wire tester, By simulating the thermal stress caused by heat source or ignition source such as hot component or overload resistor in a sh... |
 |
Thermal Protective Performance Tester (TPP) | Product details The Thermal Protective Performance (TPP) Test Device was developed to measure the time elapsed for convective and radiant heat to ... |
 |
Battery Powder resistivity meter | Product Advantages Unmatched Measurement Flexibility Dual-probe compatibility: Switch seamlessly betweenfour-point probe(for low-resistance m... |
 |
Shoe bending Angle tester | Product Introduction: Shoe bending Angle testing machine is mainly used for outsole rigidity test, with a solid block the front of the shoe clampe... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
