Guide wire friction tester
Product introduction
The guide wire friction tester is mainly used to measure the friction between the guide
wire and the guide wire. This device is of great significance for research and practice in the
medical field because it can help doctors understand the movement characteristics of the
catheter and guide wire in the human body, so as to optimize surgical procedures and
improve treatment results.
Test principle
The sample is clamped between the two chuck of the fixture, the two chuck do relative
movement, and the puncture or opening force test will be carried out through the special
chuck. Through the force sensor located on the moving clamp head and the displacement
sensor built in the machine, the change of force value and displacement in the test process
is collected, and the corresponding force value data is obtained.
Test standard
YY/T1536-2017,GB 8808, GB/T 1040.1-2006, GB/T 1040.2-2006, GB/T 1040.3-2006,
GB/T 1040.4-2006, GB/T 2791,GB/T 1040.5-2008,GB/T 12914-2008, GB/T 17200,
GB/T 16578.1-2008, GB/T 2790, GB/T 2792, GB/T 17590, GB/T 4850-2002,QB/T 2358,
QB/T 1130, GB/T 7122,ISO 37, ASTM D882, ASTM E4, ASTM D3330, ASTM F904,ASTM F88,
ASTM D1938.
Technical parameter
1. Test range: 0-500N （50N, 100N, 200N, 1000N other ranges are optional）
2. Measurement accuracy: 0.5 level
3. Travel: 800mm
4. Test speed: 0.5-500mm/min stepless transmission
5. Displacement accuracy: 0.01mm
6. Sample quantity: 1 piece
7. Chuck size: 0-30mm
8. Shape: 450mm（L）× 500mm（B）× 1500mm（H）
9. Weight: 75kg
Send product request
Other supplier products
 |
Mask Visual Field Test meter | Application: Mask Visual Field Tester to determine whether field of vision under the mask meets the standard requirement or not. Standards: GB 2... |
 |
Car seat fatigue tester | Applicable standards: GB/T 18941-2003"Test method of foam polymer materials for car seats" : This standard specifies the test method of foam polym... |
 |
Safety Helmets Wearing Stability Tester | Standard GB 811-2022: Safety Helmets – General Technical Requirements GB 24429-2009: Sports Helmets – Requirements and Test Methods ... |
 |
Circular Sample Cutter Tester | Application Textile Industry: Cutting wool, cotton, chemical fiber, and knitted fabric samples for quality inspection. Packaging & Papermakin... |
 |
Falling Sand Abrasion Tester | Applicable Standard JG/T 133-2000 ASTM D968-83 ASTMD333 ASTMD1395 ASTMD2205 Main Purposes It is mainly used to test the abrasion - resistanc... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
