Catheter bending resistance tester
Product introduction
The tester is composed of a programmable controller, a touch screen, a force sensor,
a transmission device, an airborne printer, etc. It provides a menu display in both Chinese
and English, and has a test mode for automatic operation of various parameters set by
man-machine dialogue. Test control range includes: nominal capacity, core rod displacement,
print setting, test, up, down, time, calibration, verification and other function Settings. With
the on-board printed test, the test load and sliding data （starting force, average force,
maximum thrust） can be displayed in real time. Automatically judge the test results, start
the automatic buzzer alarm if unqualified, and print out the test data and results by the printer
for analysis.
Test principle
The loop circumference of the catheter is expressed as the bending length, and the flow
rate of the catheter drainage cavity and the irrigation cavity is measured under the bending
length, so as to reduce the initial flow rate of the corresponding cavity after the flat catheter
is placed by 50%.
Meet the standard
YY/T 0325-2016, GB/T 15812.1-2005
Technical parameter
1. Static level height: 1000±5mm, automatic circulation of water pump （adjustable
static water surface）
2. Time controller: 0-- 60min, error is not more than ±1S
3. Fixture: suitable for various catheters
4. Flow calculation: measuring cylinder method
5. Flow rate: >500ML/MIN
6. Overall size: 400×290×240（mm）
在线联系供应商
Other supplier products
 |
Liquid Resistance Tester for Automotive Wires | Test Standards: Requirements for liquid resistance tests of automotive wires in ISO 6722, SAE J1128, QC/T 730, and JASOD611 Main Parameters: T... |
 |
fogging test equipment | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Smoke - Emission Testing Machine for Aerospace Wires and Cables | Standards Compliance: In accordance with the provisions of the U.S. military specifications MIL - W5086C and 22759D, as well as "GJB17.17 - 84 Tes... |
 |
Safety shoe impact testing machine | Product Introduction: According to standards BS-953,1870,EN-344,ANSI-Z41,CSA-Z195 ISO K88782 Weight of drop weight （EN） 20±0.2kg,（BS,ANSI）... |
 |
Shoes Heat Insulation Tester | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
