Rubber vulcanizer without rotor
Product Introduction:
Non-rotor vulcanizer is a rubber processing industry control rubber material quality, rapid inspection and rubber basic research and application instrument, for rubber optimization formula combination provides accurate data, can accurately measure the coke time, positive vulcanization time, vulcanization index and large, small torque and other parameters.
Reference standard:
ASTM D5289-95, ISO 6502-1999（E）， GB/T 16584-1996
Technical parameters:
Temperature measurement range: 0--200℃
Setting range: 0--200℃
Temperature display range: 0--200℃
Set time range: 0-200 minutes
Torque measuring range: 0-5N.m, 0-10N.m, 0-20N.m
Power supply: AC 220V±10%, 50±1Hz, must be well grounded
Compressed air: 0.32Mpa, controlled by pneumatic control valve
Swing frequency: 100 times/min （about 1.7HZ）
Ambient temperature: 0-40 ℃， relative humidity is less than 80%, the air does not contain corrosive gases
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
New energy wire and cable extrusion & scraping tester | Product Introduction: The new energy wire and cable extrusion jacket scratching tester is used to test the scratching resistance of the plastic ja... |
 |
Liquid Sliding Penetration Comprehensive Performance Tester | Main uses: The liquid penetration tester is suitable for measuring the penetration performance of diapers, including the amount of slippage, back ... |
 |
Motor Accessories Combustion Chamber | Introduction: This machine is designed according to ISO3795 standards and relevant clauses. Apply to identify vehicles (cars, multipurpose passeng... |
 |
Textile Fiber Composition Analyzer | Standard ASTM D276(Standard Test Method for Identification of Fibers in Textiles) ISO 1833(Determination of Fiber Content in Textiles) AATCC 2... |
 |
Spray Aerosol Ignition Distance Test device | Product Description Conforms to UN Recommendations on the Transportation of Dangerous Goods - Manual of Tests and Criteria 31.4 Ignition Distance ... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
