.

Rubber vulcanizer without rotor

Product Introduction:

Non-rotor vulcanizer is a rubber processing industry control rubber material quality, rapid inspection and rubber basic research and application instrument, for rubber optimization formula combination provides accurate data, can accurately measure the coke time, positive vulcanization time, vulcanization index and large, small torque and other parameters.

Reference standard:

ASTM D5289-95, ISO 6502-1999(E), GB/T 16584-1996

Technical parameters:

Temperature measurement range: 0--200℃

Setting range: 0--200℃

Temperature display range: 0--200℃

Set time range: 0-200 minutes

Torque measuring range: 0-5N.m, 0-10N.m, 0-20N.m

Power supply: AC 220V±10%, 50±1Hz, must be well grounded

Compressed air: 0.32Mpa, controlled by pneumatic control valve

Swing frequency: 100 times/min (about 1.7HZ)

Ambient temperature: 0-40 ℃, relative humidity is less than 80%, the air does not contain corrosive gases


Send product request

To: Qinsun Instruments Co., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Cone Calorimeter
Cone Calorimeter Ignition system 1、 10kV spark lighter with safe fire-off device. The lighter automatically detect its position via the lever which connects to the...
Fabric Washing Shrinkage Test Machine
Fabric Washing Shrinkage Test Machine Standards: AATCC 88B, AATCC 88C, AATCC 124. AATCC 130. AATCC 135. AATCC 142. AATCC 143. AATCC 150. AATCC 159. AATCC 172. AATCC 179. AATCC 188 Appli...
Thermal Insulation Material Smoldering Tester
Thermal Insulation Material Smoldering Tester Product Introduction: Thermal insulation material smoldering test furnace is a performance test device, using intelligent touch screen control sys...
Plastic Pipe Hydrostatic Pressure Burst Tester
Plastic Pipe Hydrostatic Pressure Burst Tester Standard ISO 1167: For thermoplastics pipe systems under constant internal pressure. ASTM D 1598: Standard test method for time-to-failure of pla...
Battery impact tester
Battery impact tester  The test sample cell is placed on a flat surface with a 15.8±0.2mm(5/8 in) diameter rod placed in a cross position over the center of the ...
All supplier products

Same products

Full-Body Garment Stress Tester,FZ/T 70015
Full-Body Garment Stress Tester,FZ/T 70015 Seller: Standard International Group (HK) Limited TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
Industrial Dry Cleaning Machine,industrial garment steamer
Industrial Dry Cleaning Machine,industrial garment steamer Seller: Standard International Group (HK) Limited TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
MST Medical Compression Stocking Tester,compression sock tester
MST Medical Compression Stocking Tester,compression sock tester Seller: Standard International Group (HK) Limited The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool Seller: Standard International Group (HK) Limited Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
Dental material color stability tester
Dental material color stability tester Seller: Standard International Group (HK) Limited Application The applications of color stability testers for dental materials are mainly reflecte...