.

Rubber vulcanizer without rotor

Product Introduction:

Non-rotor vulcanizer is a rubber processing industry control rubber material quality, rapid inspection and rubber basic research and application instrument, for rubber optimization formula combination provides accurate data, can accurately measure the coke time, positive vulcanization time, vulcanization index and large, small torque and other parameters.

Reference standard:

ASTM D5289-95, ISO 6502-1999(E), GB/T 16584-1996

Technical parameters:

Temperature measurement range: 0--200℃

Setting range: 0--200℃

Temperature display range: 0--200℃

Set time range: 0-200 minutes

Torque measuring range: 0-5N.m, 0-10N.m, 0-20N.m

Power supply: AC 220V±10%, 50±1Hz, must be well grounded

Compressed air: 0.32Mpa, controlled by pneumatic control valve

Swing frequency: 100 times/min (about 1.7HZ)

Ambient temperature: 0-40 ℃, relative humidity is less than 80%, the air does not contain corrosive gases


在线联系供应商

至: 上海千实精密仪器
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Automatic Scratch Test device
Automatic Scratch Test device Product Introduction: It is suitable for printing, labeling, mobile shell, MP3/MP4 shell, laptop computer shell and other kinds of household appl...
Full Face Masks Flame Resistance Test Machine
Full Face Masks Flame Resistance Test Machine Introduction Fireman fire-protective clothing is mainly composed of jacket and bibcomposition,may also wear fire protective helmets, fire protecti...
Timken Bearing Friction and Wear Tester
Timken Bearing Friction and Wear Tester Testing Standards ASTM D 2509 ASTM D 2782 GB/T3142 SH/T0204 Applicable standards Timken extreme pressure friction testing machines are usuall...
Contact heat transmission test machine
Contact heat transmission test machine Introduction: This part of ISO 12127 specifies a test method designed to evaluate the heat transfer and the behaviour ofmaterials used for protect...
Battery Slurry Resistance Tester
Battery Slurry Resistance Tester Standard ASTM B193: Standard Test Method for Resistivity of Electrical Conductor Materials ISO 18516: Conductive Coatings – Measurement of ...
供应产品

Same products

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 卖方: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
Surface Performance Tester STD-FB4 - A 卖方: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A 卖方: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH 卖方: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S 卖方: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...