Scratch tester
Все товары поставщика
Product Introduction:
With the continuous expansion of the use of plastic molding products, from the point of view of the surface appearance of molded products （creativity）， improving scratch resistance （scratch characteristics） has become an important topic. And scratch resistance is also very important from the point of view that scars formed on the surface of the molded product may reduce the strength of the product. Scratch testing is performed by horizontal movement of the scratch needle against the pattern. Scratch characteristics were previously evaluated by a "constant vertical load test", but the American Society for Materials and Testing （ASTM） and the International Organization for Standardization （ISO） standardized the "vertical load test" （ASTM D7027-05/S019252）。
Scope of application:
The tester uses a steel needle to scratch films, plastics, automotive interior and exterior decorative materials, coating materials, etc., to evaluate the material's "scratch resistance" （scratch characteristics）。
Features of scratch tester:
1. Teaching function
Use this function to set the load zone with high precision before sampling.
2. Easy to operate with touch screen
All functions can be used and configured through the touch screen installed in front of the Settings.
3, the surface has a bump can also test scratches
The Yaru drive for vertical loads uses a county frame mechanism, so that even the surface with a concave and convex pattern can be tested without affecting the linear increase in load characteristics.
4. Memorizable test conditions
Storage capacity up to 20, capable of memorizing test conditions.
Technical parameters:
The STD-02 is fully compliant with I50 and ASTM International standards
Size :W545*D455*H680（mm）
Weight: About 65KG
Test mode: Load increase mode
Speed range :1——200 mm/sec
Vertical （z） load control range :1——50N
Horizontal （x） load test range :50N
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Bacterial Filtration Efficiency Tester | Standards: YY 0469-2004 Technical requirements for surgical mask BS EN 14683-2014 Medical face masks - Requirements and test methods ASTM F2100-... |
 |
Flash Measurement Instrument | Product Introduction: VMO series flash measuring instrument is mainly used to measure the plane size, such as precision workpiece, stamping parts,... |
 |
Vertical Flammability Test Chamber ASTM D6413 CALIF TB117 | Standards: ASTM D6413. CALIF TB117. DOC-FF 3/71. 16CFR Parts1615/1616. FTMS 191-5903. CPAI 84 Applications: The Vertical Flammability Test Chamb... |
 |
Sample cutter 100cm | Sample cutter 100cm - Other test instrument - standard Standards: Applications: The application of sharp cutter wide. Even difficult mat... |
 |
Stain resistance tester for architectural coatings | Product Introduction: The interior wall coating in architectural coatings is often polluted by some pollution from daily necessities, people often... |
Похожие товары
 |
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester | Продавец: Коллирон электроникс лимитед | Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent... |
 |
ORP-2026S Waterproof Soil ORP and Temperature Meter | Продавец: Коллирон электроникс лимитед | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
TDS-2616 Waterproof EC/TDS/Temperature Meter | Продавец: Коллирон электроникс лимитед | Range EC ～19.9mS TDS Temp 0～50℃ R... |
 |
EC-98330 CF ECOstick - Nutrient Tester | Продавец: Коллирон электроникс лимитед | Ideal for hydroponics and agriculture applications, theNutrient Tester accurately measures the el... |
 |
PH-808 Waterproof Soil PH Meter | Продавец: Коллирон электроникс лимитед | Model PH-808 Range PH ～14.00PH Temp 0～50℃ ... |
