Battery combustion tester

The Battery Combustion Tester is designed for safety evaluation of lithium-ion batteries by simulating direct exposure to flame jet combustion under extreme conditions.

The equipment verifies battery behavior when subjected to sustained flame impingement, including risks of ignition, explosion, rupture, or excessive temperature rise.

The system adopts liquefied petroleum gas (LPG) as fuel with a Bunsen burner configuration and integrates a reinforced explosion-proof test chamber, gas leakage protection, and automatic flame control, making it suitable for laboratory certification testing and safety compliance evaluation.

Application

(1) Cylindrical lithium-ion cells (e.g. 18650, 21700)

(2) Prismatic lithium-ion batteries

(3) Pouch (polymer) lithium batteries

(4) Button and coin cells

(5) Lithium-ion battery packs for consumer electronics

(6) Power batteries for electric vehicles

(7) Energy storage battery modules

Standards

(1) UN 38.3 – Lithium Batteries Transport Testing

(2) UL 1642:2012 – Lithium Batteries Safety Standard

(3) UL 2054:2012 – Household and Commercial Batteries

(4) IEC 62281:2004 – Safety of Primary and Secondary Lithium Cells and Batteries

(5) GB 31241-2014 – Safety Requirements for Lithium-Ion Cells and Batteries

(6) SJ/T 11170-1998 – Lithium-Ion Battery Safety Test Methods

Features

(1) Designed for battery flame jet combustion testing in accordance with GB 31241 and related standards

(2) Uses high-purity liquefied petroleum gas as fuel with Bunsen burner structure

(3) Automatic ignition system with adjustable flame application time

(4) Continuously adjustable flame height to meet different standard requirements

(5) Strictly designed test steel mesh and aluminum mesh in accordance with standard specifications

(6) Precisely defined burner position and test platform geometry

(7) Double-layer reinforced test chamber with explosion-proof pressure relief port

(8) Built-in lighting system for clear observation during testing

(9) Dual gas leakage alarm system with automatic gas shut-off function

(10) High-quality electrical components ensuring stable and reliable operation

(11) Supports switching between local and remote control operation

(12) Optional fire extinguishing module and video monitoring system

Technical Parameters

Parameter	Specification
Test Item	Flame Jet Combustion Test
Test Objects	Button, cylindrical, pouch, prismatic lithium batteries
Combustion Gas	High-purity liquefied petroleum gas (LPG)
Burner Type	Bunsen burner
Burner Tube Inner Diameter	9.5 mm
Burner Tube Length	100 mm
Flame Control	Automatic ignition; flame application time and combustion duration 0–999 s, continuously adjustable
Flame Height	10–75 ±2 mm
Test Steel Mesh	Wire diameter 0.45 mm, 20 mesh
Test Aluminum Mesh	Wire diameter 0.25 mm, 16 mesh
Power Supply	Single-phase 220 VAC ±10% (110 VAC optional), 50/60 Hz
Rated Power	0.5 kW
Operating Temperature	25 ± 3 ℃ (recommended)
Operating Humidity	30–90 %RH
Explosion Protection	Pressure relief port, reinforced enclosure
Auxiliary Functions	Built-in lighting, optional fire extinguisher, optional video monitoring*
Installation Dimensions	W1020 × D980 × H1865 mm
Equipment Weight	Approx. 357 kg

* Video monitoring requires customer-provided PoE switch compliant with IEEE 802.3af/at.

Accessories

(1) Bunsen burner assembly

(2) Steel test mesh

(3) Aluminum protection mesh

(4) Gas leakage detection system

(5) Explosion-proof observation structure

(6) Built-in illumination system

(7) Optional fire extinguishing module

(8) Optional video monitoring system

Test Procedures

(1) Place the battery sample on the test platform above the specified steel mesh

(2) Select the applicable test standard and flame parameters

(3) Adjust flame height and flame application time

(4) Close and secure the explosion-proof test chamber

(5) Ignite the burner automatically and apply the flame to the sample

(6) Observe battery behavior through the observation window

(7) Record test results and inspect the sample after completion

Maintenance Information

(1) Regularly inspect gas pipelines, burner, and leakage alarm devices

(2) Check steel mesh and aluminum mesh for deformation or damage

(3) Verify flame height calibration periodically

(4) Keep electrical and gas components clean and dry

(5) Perform routine maintenance according to usage frequency

Другие товары поставщика

	Diaper Side-Leakage Prevention Performance Tester	Meet the standard: Compliant with GB: GB/T 28004.1 Diapers Part 1: Baby Diapers. GB/T 28004.2-2021 Disposable diapers—Part 2:Disposable dia...
	Helmet Wearing Height Testing Machine	The helmet wearing height testing machine is a testing device used to evaluate the comfort and safety performance of helmets. It precisely measures...
	Standard Helmet Visual Field Tester	The Standard Helmet Visual Field Tester is a precision instrument designed to evaluate the peripheral vision and visor obstruction of safety helmet...
	Carbon Black Content Tester	A Carbon Black Content Tester is an instrument used to measure the carbon black content in materials. Applications The Carbon Black Content Teste...
	Rubber Mooney Viscosity meter	Test principle: The Mooney viscometer is used to measure the viscosity of rubber under specific conditions. In the test, the rubber sample was loa...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...