Battery combustion tester
The Battery Combustion Tester is designed for safety evaluation of lithium-ion batteries by simulating direct exposure to flame jet combustion under extreme conditions.
The equipment verifies battery behavior when subjected to sustained flame impingement, including risks of ignition, explosion, rupture, or excessive temperature rise.
The system adopts liquefied petroleum gas (LPG) as fuel with a Bunsen burner configuration and integrates a reinforced explosion-proof test chamber, gas leakage protection, and automatic flame control, making it suitable for laboratory certification testing and safety compliance evaluation.
Application
(1) Cylindrical lithium-ion cells (e.g. 18650, 21700)
(2) Prismatic lithium-ion batteries
(3) Pouch (polymer) lithium batteries
(4) Button and coin cells
(5) Lithium-ion battery packs for consumer electronics
(6) Power batteries for electric vehicles
(7) Energy storage battery modules
Standards
(1) UN 38.3 – Lithium Batteries Transport Testing
(2) UL 1642:2012 – Lithium Batteries Safety Standard
(3) UL 2054:2012 – Household and Commercial Batteries
(4) IEC 62281:2004 – Safety of Primary and Secondary Lithium Cells and Batteries
(5) GB 31241-2014 – Safety Requirements for Lithium-Ion Cells and Batteries
(6) SJ/T 11170-1998 – Lithium-Ion Battery Safety Test Methods
Features
(1) Designed for battery flame jet combustion testing in accordance with GB 31241 and related standards
(2) Uses high-purity liquefied petroleum gas as fuel with Bunsen burner structure
(3) Automatic ignition system with adjustable flame application time
(4) Continuously adjustable flame height to meet different standard requirements
(5) Strictly designed test steel mesh and aluminum mesh in accordance with standard specifications
(6) Precisely defined burner position and test platform geometry
(7) Double-layer reinforced test chamber with explosion-proof pressure relief port
(8) Built-in lighting system for clear observation during testing
(9) Dual gas leakage alarm system with automatic gas shut-off function
(10) High-quality electrical components ensuring stable and reliable operation
(11) Supports switching between local and remote control operation
(12) Optional fire extinguishing module and video monitoring system
Technical Parameters
| Parameter | Specification |
|---|---|
| Test Item | Flame Jet Combustion Test |
| Test Objects | Button, cylindrical, pouch, prismatic lithium batteries |
| Combustion Gas | High-purity liquefied petroleum gas (LPG) |
| Burner Type | Bunsen burner |
| Burner Tube Inner Diameter | 9.5 mm |
| Burner Tube Length | 100 mm |
| Flame Control | Automatic ignition; flame application time and combustion duration 0–999 s, continuously adjustable |
| Flame Height | 10–75 ±2 mm |
| Test Steel Mesh | Wire diameter 0.45 mm, 20 mesh |
| Test Aluminum Mesh | Wire diameter 0.25 mm, 16 mesh |
| Power Supply | Single-phase 220 VAC ±10% (110 VAC optional), 50/60 Hz |
| Rated Power | 0.5 kW |
| Operating Temperature | 25 ± 3 ℃ (recommended) |
| Operating Humidity | 30–90 %RH |
| Explosion Protection | Pressure relief port, reinforced enclosure |
| Auxiliary Functions | Built-in lighting, optional fire extinguisher, optional video monitoring* |
| Installation Dimensions | W1020 × D980 × H1865 mm |
| Equipment Weight | Approx. 357 kg |
* Video monitoring requires customer-provided PoE switch compliant with IEEE 802.3af/at.
Accessories
(1) Bunsen burner assembly
(2) Steel test mesh
(3) Aluminum protection mesh
(4) Gas leakage detection system
(5) Explosion-proof observation structure
(6) Built-in illumination system
(7) Optional fire extinguishing module
(8) Optional video monitoring system
Test Procedures
(1) Place the battery sample on the test platform above the specified steel mesh
(2) Select the applicable test standard and flame parameters
(3) Adjust flame height and flame application time
(4) Close and secure the explosion-proof test chamber
(5) Ignite the burner automatically and apply the flame to the sample
(6) Observe battery behavior through the observation window
(7) Record test results and inspect the sample after completion
Maintenance Information
(1) Regularly inspect gas pipelines, burner, and leakage alarm devices
(2) Check steel mesh and aluminum mesh for deformation or damage
(3) Verify flame height calibration periodically
(4) Keep electrical and gas components clean and dry
(5) Perform routine maintenance according to usage frequency
在线联系供应商
Other supplier products
 |
Artificial turf wear tester | Standard FIFA Quality Programme: Exceeds 2015/2016 handbook requirements for artificial turf abrasion resistance testing. EN 15330-1: European st... |
 |
High Low Temperature Test Chamber | Features and Benefits 1.Adopt advanced temperature control system, the controller according to the feedback signal accurately regulate the cooling... |
 |
Adiabatic Accelerated Calorimeter | Product Description Adiabatic Accelerated Calorimeter determines the thermal behavior of samples under adiabatic conditions by keeping the tempera... |
 |
Safety Helmets Acceleration Impact & Penetration Tester | The Safety Helmets Acceleration Impact & Penetration Tester is a dual-mode testing instrument designed to evaluate helmet performance under bot... |
 |
Medical Face Mask Differential Pressure Tester | The Medical Face Mask Differential Pressure Tester, also known as the Mask Breathability Tester, is designed to evaluate the breathability of medic... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
