Alcohol abrasion tester

The Alcohol Abrasion Tester is designed for evaluating the wear and friction resistance of coatings, prints, and surfaces under controlled laboratory conditions. It simulates real-world abrasion scenarios using various friction media such as erasers, alcohol-soaked cotton, steel velvet, and sheepskin. Widely applicable in plastics, wires, electronics, and leather industries, it provides accurate, repeatable results for quality control and product development.

Application

(1) Testing abrasion resistance of printed coatings on plastics, electronic housings, wires, and leather.

(2) Evaluating durability of oil sprays, screen prints, and surface coatings under repeated friction.

(3) Quality control for consumer electronics, household appliances, and automotive interior materials.

(4) Research and development of new coatings, inks, or protective finishes.

(5) Assessing the wear resistance of decorative or functional surfaces in manufacturing.

(6) Comparing performance of different friction media on material surfaces.

(7) Determining material performance under simulated operational abrasion conditions.

Standards

(1) ASTM D6279 – Standard Test Method for Abrasion Resistance of Coatings by Taber Abraser.

(2) AATCC Test Method 8 / ISO 105-X12 – Colorfastness to Crocking.

(3) ASTM D3363 – Standard Test Method for Film Hardness by Pencil Test.

(4) UL 969 / UL 2601-1 – Standard for Marking and Labeling Systems.

Features

(1) Reciprocating Motion System with variable convex shaft and Japanese original ball drive for smooth and precise movement.

(2) Double Test Stations allow simultaneous testing of two samples.

(3) Adjustable Working Stroke from 2mm to 50mm.

(4) Variable Working Speed from 10 to 60 cycles per minute (rpm).

(5) Digital LCD Counter capable of displaying up to 999,999 cycles.

(6) Four independent friction groups supporting multiple friction media simultaneously.

(7) Load Application System with calibrated weights (100g, 200g, 300g, 500g, two of each) for precise force application.

(8) Compatible with diverse friction media: eraser, alcohol/cotton, steel velvet, sheepskin.

(9) Motorized drive (25W) ensures consistent operation.

(10) Substantial workpiece table (400x200mm) for secure sample placement.

(11) Compact and robust design suitable for laboratory use.

Parameters

Parameter	Specification
Friction media	Eraser, alcohol/cotton, steel velvet, sheepskin (user-supplied)
Load weights	100g, 200g, 300g, 500g (two of each)
Counter	0–999,999 LCD display
Working stroke	2–50mm adjustable
Working speed	10–60 rpm adjustable
Number of friction groups	4
Motor	25W
Power supply	AC220V/50Hz
Dimensions (L×W×H)	500×460×550mm
Net weight	26kg
Workpiece table size	400×200mm

Accessories

(1) Calibrated load weights: 100g, 200g, 300g, 500g (two of each).

(2) Friction media holders for erasers, alcohol/cotton, steel velvet, sheepskin.

(3) Workpiece table for securing samples.

(4) Motor drive system.

(5) Digital LCD friction counter.

Test Procedures

(1) Secure the sample on the workpiece table.

(2) Select friction media and attach to the respective friction group.

(3) Apply calibrated load weights as required for the test.

(4) Set working stroke and speed according to the test requirements.

(5) Start the motorized reciprocating motion; the sample undergoes friction cycles.

(6) Monitor the cycle count via the digital LCD counter.

(7) Upon reaching the desired number of cycles, stop the test and evaluate the sample surface for wear or damage.

(8) Record observations and data for analysis.

Maintenance Information

(1) Clean friction media and holders after each test to prevent contamination.

(2) Check and maintain the motor drive and ball drive mechanism periodically.

(3) Inspect calibrated weights for wear or damage.

(4) Keep the workpiece table clean and free of debris.

(5) Store the instrument in a dry and stable environment.

(6) Verify calibration of the digital LCD counter periodically for accurate cycle counting

Другие товары поставщика

	Battery Diaphragm Gas Permeability Tester	The Battery Diaphragm Gas Permeability Tester is a precision instrument designed to evaluate the gas permeability of battery diaphragms and separat...
	Falling ball impact testing machine	Product Introduction: Falling ball impact tester is suitable for testing the fastness of plastic, ceramic, acrylic, glass fiber and other material...
	Metal Corrosivity Tester	The Metal Corrosivity Tester is used to determine the corrosivity of liquids and solids that may become liquid during transport. It conforms to the...
	Torsional Fatigue Tester	Standard YY/T 0857-2011 (China): Specifies torsional fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, freque...
	Rupture strength tester	Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 61730: Safety Standard for Photovoltaic M...

Все товары поставщика

Похожие товары

	Gas Oxidizing Property Tester	Продавец: Standard International Group (HK) Limited	Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
	Battery Powder Compaction Density Measurement System	Продавец: Standard International Group (HK) Limited	The Battery Powder Compaction Density Measurement System is a precision testing system designed...
	Battery Powder resistance tester	Продавец: Standard International Group (HK) Limited	The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
	KES-SESRU surface roughness/friction tester	Продавец: Standard International Group (HK) Limited	TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...