Alcohol abrasion tester
The Alcohol Abrasion Tester is designed for evaluating the wear and friction resistance of coatings, prints, and surfaces under controlled laboratory conditions. It simulates real-world abrasion scenarios using various friction media such as erasers, alcohol-soaked cotton, steel velvet, and sheepskin. Widely applicable in plastics, wires, electronics, and leather industries, it provides accurate, repeatable results for quality control and product development.
Application
(1) Testing abrasion resistance of printed coatings on plastics, electronic housings, wires, and leather.
(2) Evaluating durability of oil sprays, screen prints, and surface coatings under repeated friction.
(3) Quality control for consumer electronics, household appliances, and automotive interior materials.
(4) Research and development of new coatings, inks, or protective finishes.
(5) Assessing the wear resistance of decorative or functional surfaces in manufacturing.
(6) Comparing performance of different friction media on material surfaces.
(7) Determining material performance under simulated operational abrasion conditions.
Standards
(1) ASTM D6279 – Standard Test Method for Abrasion Resistance of Coatings by Taber Abraser.
(2) AATCC Test Method 8 / ISO 105-X12 – Colorfastness to Crocking.
(3) ASTM D3363 – Standard Test Method for Film Hardness by Pencil Test.
(4) UL 969 / UL 2601-1 – Standard for Marking and Labeling Systems.
Features
(1) Reciprocating Motion System with variable convex shaft and Japanese original ball drive for smooth and precise movement.
(2) Double Test Stations allow simultaneous testing of two samples.
(3) Adjustable Working Stroke from 2mm to 50mm.
(4) Variable Working Speed from 10 to 60 cycles per minute (rpm).
(5) Digital LCD Counter capable of displaying up to 999,999 cycles.
(6) Four independent friction groups supporting multiple friction media simultaneously.
(7) Load Application System with calibrated weights (100g, 200g, 300g, 500g, two of each) for precise force application.
(8) Compatible with diverse friction media: eraser, alcohol/cotton, steel velvet, sheepskin.
(9) Motorized drive (25W) ensures consistent operation.
(10) Substantial workpiece table (400x200mm) for secure sample placement.
(11) Compact and robust design suitable for laboratory use.
Parameters
| Parameter | Specification |
|---|---|
| Friction media | Eraser, alcohol/cotton, steel velvet, sheepskin (user-supplied) |
| Load weights | 100g, 200g, 300g, 500g (two of each) |
| Counter | 0–999,999 LCD display |
| Working stroke | 2–50mm adjustable |
| Working speed | 10–60 rpm adjustable |
| Number of friction groups | 4 |
| Motor | 25W |
| Power supply | AC220V/50Hz |
| Dimensions (L×W×H) | 500×460×550mm |
| Net weight | 26kg |
| Workpiece table size | 400×200mm |
Accessories
(1) Calibrated load weights: 100g, 200g, 300g, 500g (two of each).
(2) Friction media holders for erasers, alcohol/cotton, steel velvet, sheepskin.
(3) Workpiece table for securing samples.
(4) Motor drive system.
(5) Digital LCD friction counter.
Test Procedures
(1) Secure the sample on the workpiece table.
(2) Select friction media and attach to the respective friction group.
(3) Apply calibrated load weights as required for the test.
(4) Set working stroke and speed according to the test requirements.
(5) Start the motorized reciprocating motion; the sample undergoes friction cycles.
(6) Monitor the cycle count via the digital LCD counter.
(7) Upon reaching the desired number of cycles, stop the test and evaluate the sample surface for wear or damage.
(8) Record observations and data for analysis.
Maintenance Information
(1) Clean friction media and holders after each test to prevent contamination.
(2) Check and maintain the motor drive and ball drive mechanism periodically.
(3) Inspect calibrated weights for wear or damage.
(4) Keep the workpiece table clean and free of debris.
(5) Store the instrument in a dry and stable environment.
(6) Verify calibration of the digital LCD counter periodically for accurate cycle counting
在线联系供应商
Other supplier products
 |
Carpet hair removal measurement device | Standard ASTM D5417(Standard Test Method for Quantifying Loss of Fiber from Carpets) ISO 10362(Textile Floor Coverings - Determination of Fiber... |
 |
Programmable Ozone Test Chamber | study the effects of ozone on rubber, and then identify and evaluate the method to resist ozone and aging for rubber, adopt effective anti-aging me... |
 |
Demesia Zigzag Tester | The Demesia Zigzag Tester is a professional device used to test the flexural resistance of materials such as rubber, leather, synthetic leather, an... |
 |
Solid electrolyte analysis system | The Solid Electrolyte Analysis System is a precision testing platform designed to evaluate the ionic conductivity, electrochemical impedance, and i... |
 |
PV-Panels Testing Devices | Features and Benefits 1. The capacity and performance of the workroom can be adjusted according to the size of the photovoltaic panel and your nee... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
