Flame Durability Testing Machine, ISO 9038，burning behavior test apparatus

• 

Introduce：

When the hazardous liquid is heated to 0.5 ºC and 75 ºC, flame durability tester is used to evaluate the continuous burning time. When the subject material is heated and exposed to fire according to test conditions, this instrument can test its continuous burn time.

Model:STD-ISO 9038

Standards：

(chemical registration, evaluation, authorization, restriction)

ISO 9038: liquid continuous combustion performance test

Features:

• K- type thermocouple to measure the temperature automatically.

• Temperature controller automatic to control the temperature.

• Timer recording flame continue burning time.

• Flame can be moved to the sample position.

• Portable butane gas can be stored in the special gas tank fixture;

• Pressure device can automatically measure the current barometric pressure

• Solenoid valve to control the gas switch.

• Imported gas control valve control airflow to adjust the flame length.

Test results judge condition：

• Tobe testthree times. Required to record following points:

a) Check the ignition test sample or test position when the flame moves to its continuous combustion conditions

b) When the flame is placed in the test position to be tested, check whether the sample is ignited. If ignited, then the flame is returned to the "off" position, then start the time record for combustion duration of the test specimen

• If the sample is non-sustained combustion test is deemed passed, if it is sustained combustion type, so even if the failure. If any test sample that contains one of the following, it will be defined as a particular heating time duration of combustion.

• If the test sample from the test base of 45 degrees and it is ignited, the need to observe and record its combustion performance.

• When the test sample is ignited, and the test flame is moved from the test base 45 degrees position, if sustained burn more than 15 seconds, you need to observe and record the combustion performance.

Specification:

Другие товары поставщика

	Automatic Reaction Calorimeter	Standards GB 51283 GB/T 22232 GB/T 17802 SN/T 3078.1 Product Features 1. It offers three calorimetry methods: heat - flow, power - compensati...
	Rubber Sleeve Rebound Tester	The Rubber Sleeve Rebound Tester is designed to evaluate the resilience and compression performance of collection needle rubber sleeves. It measure...
	Automatic voltage internal resistance tester	Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 3611: Calibration of Measuring Instruments ...
	Catheter Airflow Resistance Tester	The Catheter Airflow Resistance Tester is a precision testing instrument specifically designed for measuring the airflow resistance of catheters. ...
	Safety shoe impact meter	According to the criteria Bs-953.1870 EN-344. ANSI-Z41 CSA-Z195 ISO K88782 EN ISO 20344. ANSI-Z41 BS EN-344 CSA-ZI95 LD50-1994 AS/NZS 22...

Похожие товары

	Single Burning Item，test apparatus， BS EN 13823	Продавец: Standard International Group (HK) Limited	Introduction Single burning instrument (SBI) was measured supplies (excluding floorings) perform...
	Room Corner Tester，Room corner fire test equipment， ISO 13784	Продавец: Standard International Group (HK) Limited	Introduction According to ISO9705 of building materials fire prevention performance standards, t...
	Smoke Density Chamber， ISO 5659，Smoke density testing equipment	Продавец: Standard International Group (HK) Limited	Introduction The main principle is to measure smoke density in a particular space, cable or mate...
	LIFT, IMO Spread of Flame Apparatus，ISO 5658，flame propagation tester	Продавец: Standard International Group (HK) Limited
	Wire Fire Resistance Test Machine, IEC 60331， Fireproof Testing for Cable Insulation	Продавец: Standard International Group (HK) Limited	Description: Fire-resistant cable refers to the cable that can keep a safe running time in the c...