Flame Durability Testing Machine, ISO 9038，burning behavior test apparatus

Introduce：

When the hazardous liquid is heated to 0.5 ºC and 75 ºC, flame durability tester is used to evaluate the continuous burning time. When the subject material is heated and exposed to fire according to test conditions, this instrument can test its continuous burn time.

Model:STD-ISO 9038

Standards：

(chemical registration, evaluation, authorization, restriction)

ISO 9038: liquid continuous combustion performance test

Features:

• K- type thermocouple to measure the temperature automatically.

• Temperature controller automatic to control the temperature.

• Timer recording flame continue burning time.

• Flame can be moved to the sample position.

• Portable butane gas can be stored in the special gas tank fixture;

• Pressure device can automatically measure the current barometric pressure

• Solenoid valve to control the gas switch.

• Imported gas control valve control airflow to adjust the flame length.

Test results judge condition：

• Tobe testthree times. Required to record following points:

a) Check the ignition test sample or test position when the flame moves to its continuous combustion conditions

b) When the flame is placed in the test position to be tested, check whether the sample is ignited. If ignited, then the flame is returned to the "off" position, then start the time record for combustion duration of the test specimen

• If the sample is non-sustained combustion test is deemed passed, if it is sustained combustion type, so even if the failure. If any test sample that contains one of the following, it will be defined as a particular heating time duration of combustion.

• If the test sample from the test base of 45 degrees and it is ignited, the need to observe and record its combustion performance.

• When the test sample is ignited, and the test flame is moved from the test base 45 degrees position, if sustained burn more than 15 seconds, you need to observe and record the combustion performance.

Specification:

Model	STD- ISO 9038
Size	500(W) x 300(D) x 400(H)mm
Table size	1.000(W)×600(D)×800(H)mm
Power	AC 220V, 50/60Hz, 10A
Weight	20kg
Instructions	Available
Exhaust	Minimum 50L / s
Other Requirements	Butane, vacuum cleaners (optional)

Other supplier products

	Carpet Static Electricity Tester	Test Principle When a person walks on the inspected carpet wearing the shoes specified in the standard and following the prescribed walking patter...
	Building Materials Monomer Combustion test Dust Removal Equipment	Product details In a monomer combustion test, the material combustion can produce large amounts of smoke and dust, which pollutes the environment....
	Infusion device Leakage negative pressure tester	The Infusion Device Leakage Negative Pressure Tester is designed to evaluate the airtightness of syringes, infusion sets, and related medical devic...
	Syringe piston thrust tester	Product introduction The syringe piston thrust tester is a kind of high precision and high stability measuring equipment, which is used to measure...
	Puncture Strength Tester STD - NDG5	Compliance Standards ASTM D638 (Plastics Tensile Properties) ISO 13934-1 (Textile Tensile Strength) SAE J2749 (Automotive Composite Testing) JI...

供应产品

Same products

	Single Burning Item，test apparatus， BS EN 13823	卖方: Standard International Group (HK) Limited	Introduction Single burning instrument (SBI) was measured supplies (excluding floorings) perform...
	Room Corner Tester，Room corner fire test equipment， ISO 13784	卖方: Standard International Group (HK) Limited	Introduction According to ISO9705 of building materials fire prevention performance standards, t...
	Smoke Density Chamber， ISO 5659，Smoke density testing equipment	卖方: Standard International Group (HK) Limited	Introduction The main principle is to measure smoke density in a particular space, cable or mate...
	LIFT, IMO Spread of Flame Apparatus，ISO 5658，flame propagation tester	卖方: Standard International Group (HK) Limited
	Wire Fire Resistance Test Machine, IEC 60331， Fireproof Testing for Cable Insulation	卖方: Standard International Group (HK) Limited	Description: Fire-resistant cable refers to the cable that can keep a safe running time in the c...