Dry penetration tester
Все товары поставщика
Dry penetration tester is designed to determine the properties of the material on the dry matter in the size of the human body dander.
Standards compliant:
ISO 22612; YY / T 0506.5-2009
Test principle:
Test, the samples were fixed on a container. Of these containers, five containers containing Bacillus subtilis powder and one container were added as uncontrolled talc as a control. A petri dish was inserted at the bottom of each container at a distance from the bottom of the container. The equipment supporting the vessel is oscillated by a gas balloon, and the talc penetrating the sample is all dropped onto the culture dish to remove the culture of the culture dish. The experimental results were evaluated by counting the growing colonies.
The main parameters:
Vibration form: pneumatic ball vibrator
Vibration frequency: 20800 times / min
Vibration force: 650N
Worktable size: 40cm × 40cm × 10mm
Workbench media: marble plate
Experimental container: stainless steel test container
Job: 6
Cabinet negative pressure range: -50 Pa ~ -200 Pa
High efficiency filter filtration efficiency: better than 99.99%
Negative pressure cabinet ventilation flow: ≥ 5m3 / min
Data storage capacity: 100,000 group
Working voltage: 220V 50HZ
Features:
Reliable design, stable test;
Front switch glass doors, easy to observe the operation of the experimental staff;
Removable bracket, height adjustable bracket;
Support, mobile dual casters;
Negative pressure experimental system, with the fan exhaust system and the introduction of high efficiency filter to ensure the safety of operators;
Embedded high - speed industrial microcomputer control;
Dedicated operating software, with software parameters calibration, fault detection automatically
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Medical Face Mask Air Exchange Pressure Difference Tester | Products meet the standard requirements, which is YY0469-2004 "Medical surgical mask technical requirements" and YY 0969-2013 "Disposable medical m... |
 |
textile sublimation color fastness tester | Testing Standards: ISO 105 X11/P01, BS 1006, AATCC 92/114/117/133, GB/T 5718/6152, DIN 54022/54060, JIS L0879/L0850 Applications: Scorch/Sublima... |
 |
Hexapod Tumbler Tester | Hexapod Tumbler Tester Standards ofHexapod Tumbler Tester: BS EN 1471: 1997，ISO 9405: 2001 IWS test methods 247 & 251，ISO 10361: 2000 (BS) Wool... |
 |
Medical Mask Differential Pressure Tester and breathability tester | Standards: YY 0469-2011 Surgical mask YY 0969-2013 Single-use medical face mask EN 14683:2014 Medical face masks - Requirements and test methods... |
 |
EN 143 Mask Automatic Filtering Performance Tester | The tester is used for performance testing of filter elements, disposable masks, filter media, etc. for respiratory protection products. It's suita... |
Похожие товары
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Продавец: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | Продавец: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Продавец: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Продавец: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Продавец: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
