Dry penetration tester
Dry penetration tester is designed to determine the properties of the material on the dry matter in the size of the human body dander.
Standards compliant:
ISO 22612; YY / T 0506.5-2009
Test principle:
Test, the samples were fixed on a container. Of these containers, five containers containing Bacillus subtilis powder and one container were added as uncontrolled talc as a control. A petri dish was inserted at the bottom of each container at a distance from the bottom of the container. The equipment supporting the vessel is oscillated by a gas balloon, and the talc penetrating the sample is all dropped onto the culture dish to remove the culture of the culture dish. The experimental results were evaluated by counting the growing colonies.
The main parameters:
Vibration form: pneumatic ball vibrator
Vibration frequency: 20800 times / min
Vibration force: 650N
Worktable size: 40cm × 40cm × 10mm
Workbench media: marble plate
Experimental container: stainless steel test container
Job: 6
Cabinet negative pressure range: -50 Pa ~ -200 Pa
High efficiency filter filtration efficiency: better than 99.99%
Negative pressure cabinet ventilation flow: ≥ 5m3 / min
Data storage capacity: 100,000 group
Working voltage: 220V 50HZ
Features:
Reliable design, stable test;
Front switch glass doors, easy to observe the operation of the experimental staff;
Removable bracket, height adjustable bracket;
Support, mobile dual casters;
Negative pressure experimental system, with the fan exhaust system and the introduction of high efficiency filter to ensure the safety of operators;
Embedded high - speed industrial microcomputer control;
Dedicated operating software, with software parameters calibration, fault detection automatically
Send product request
Other supplier products
 |
packaging water vapor permeability tester | It measures water vapours permeability of leather. The bottles have the nut of the circular opening. The bottles are mounted on the bottles holders... |
 |
Full Face Masks Flame Resistance Tester | Full Face Helmet Flame Resistance TesterMedical mask fire test machine is to determine the fire resistance performance of medical face masks and fu... |
 |
Steaming Cylinder With Integral Steam Generator | SteamingCylinderdeterminestheshrinkageofunstressedfabricsamplessubjectedtosteaminginaclosedchamberwithanintegralsteamgenerator.Providedwithastainle... |
 |
Fabric Friction Charging Charge Tester | Standards: JIS L-1094; JIS T-8118; ZB W 04008-89; GB / T12703.2-2009; GB 12014-2009; GB / T23316-2009 Applications: Friction Charging Test... |
 |
45 degree automatic textile flammability tester | Testing Standards:ASTM D1230, FTMS 191-5908, CFR 16 Part 1610, CALIF TB 117, NFPA 702, GB/T 14644Applications:45 degree flammability tester is desi... |
Same products
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Seller: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
