G631A electric shoe stripping testing machine

• 

Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the principle is to load the shoe on the shoe last clamp on the machine, peel the sole and the upper joint with the peeling knife, measure the force required when stripping force is the peeling force, and then calculate the peeling strength according to the peeling force and the width of the knife edge.

Reference standard:

GB/T 15107-2013, GB/T 3903.3-2011, BS 20344, QB/T 4329-2012, QB/T 1002-2015.6.5 and other standards

Technical parameters:

1, Peeling force: 1000N

2, peeling knife width: 20±0.2mm and 10±0.1mm

3, peeling knife edge down speed: 20±2mm/min, rise and fall speed is adjustable

4, positioning rod and tie rod spacing: 50——70mm adjustable

5, dial gauge: 0.001—— 10mm, accuracy: 0.001

6, the average lifting range: 40mm

7, volume （approx.） : 560×320×750mm

8, Power supply: 1∮， AC220V, 50HZ

9, Weight （approx.） : 45kg

Другие товары поставщика

	Particle Abrasion Tester	The Q-4D particle wear tester is specially designed as a standard instrument based on the national standard "Method for Determination of Wear Rate ...
	G678W-L cold resistance testing machine for shoes	Shoes cold resistance testing machine is used to test finished shoes, rubber, sole, synthetic leather, plastic and other test requirements under va...
	E-bike chassis dynamometer testing machine	Meet the standard: EN 15194 ISO 4210 UL 2849 Product Introduction: Electric bicycles are complex systems involving mechanical, electrical, a...
	Cylindrical Battery In-Situ Volume Swelling Testing System	Standard UL 1642: Standard for Lithium Batteries IEC 62660-2: Secondary Lithium-Ion Cells – Part 2: Reliability and Abuse Testing ASTM E83...
	Heel impact fatigue testing machine	Main uses: Heel impact fatigue testing machine is mainly used to test the continuous impact tolerance index of women's high heels, mid-heels and o...

Похожие товары

	Falling Sand Abrasion Test machine	Продавец: Standard International Group (HK) Limited	The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance...
	Conveyor Belt Drum Friction Testing Machine	Продавец: Standard International Group (HK) Limited	Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes...
	Dry Sand Rubber Wheel Wear Tester	Продавец: Standard International Group (HK) Limited	The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater...
	Sliding Bearing Fatigue Testing Machine	Продавец: Standard International Group (HK) Limited	The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua...
	High temperature vacum friction & wear tester	Продавец: Standard International Group (HK) Limited	The working principle of a high-temperature vacuum friction and wear testing machine is to simula...