G631A electric shoe stripping testing machine
Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the principle is to load the shoe on the shoe last clamp on the machine, peel the sole and the upper joint with the peeling knife, measure the force required when stripping force is the peeling force, and then calculate the peeling strength according to the peeling force and the width of the knife edge.
Reference standard:
GB/T 15107-2013, GB/T 3903.3-2011, BS 20344, QB/T 4329-2012, QB/T 1002-2015.6.5 and other standards
Technical parameters:
1, Peeling force: 1000N
2, peeling knife width: 20±0.2mm and 10±0.1mm
3, peeling knife edge down speed: 20±2mm/min, rise and fall speed is adjustable
4, positioning rod and tie rod spacing: 50——70mm adjustable
5, dial gauge: 0.001—— 10mm, accuracy: 0.001
6, the average lifting range: 40mm
7, volume （approx.） : 560×320×750mm
8, Power supply: 1∮， AC220V, 50HZ
9, Weight （approx.） : 45kg
Send product request
Other supplier products
 |
Helmet Visor High-Speed Pellet Impact Tester/ Helmet visor high-speed impact tester/ Visor ballistic impact tester | Introduction: In critical environments, from motorsports and tactical operations to industrial safety and extreme sports, a helmet's visor isn't... |
 |
Spring tension testing machine | Product Introduction: The spring tension and compression testing machine has accurate loading speed and force measurement range, and has high prec... |
 |
Photovoltaic module insulation resistance tester/ Solar panel insulation tester/IEC 61215 insulation resistance testing | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 61730: Safety Standard for Photovol... |
 |
Fabric Fiber Shedding Degree Tester (Friction Method)/GB/T 40270 - 2021 | Instrument Testing Principle Lay the specimen flat and fix it on the holder. Make the wet abrasive attached to the friction head perform reciproca... |
 |
Medical injection needle tip puncture force tester | Medical injection needle tip puncture force tester - Other test instrument - standard Standards: GB15811-2016 "Disposable Sterile Injection Nee... |
Same products
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Seller: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
