G631A electric shoe stripping testing machine
Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the principle is to load the shoe on the shoe last clamp on the machine, peel the sole and the upper joint with the peeling knife, measure the force required when stripping force is the peeling force, and then calculate the peeling strength according to the peeling force and the width of the knife edge.
Reference standard:
GB/T 15107-2013, GB/T 3903.3-2011, BS 20344, QB/T 4329-2012, QB/T 1002-2015.6.5 and other standards
Technical parameters:
1, Peeling force: 1000N
2, peeling knife width: 20±0.2mm and 10±0.1mm
3, peeling knife edge down speed: 20±2mm/min, rise and fall speed is adjustable
4, positioning rod and tie rod spacing: 50——70mm adjustable
5, dial gauge: 0.001—— 10mm, accuracy: 0.001
6, the average lifting range: 40mm
7, volume （approx.） : 560×320×750mm
8, Power supply: 1∮， AC220V, 50HZ
9, Weight （approx.） : 45kg
在线联系供应商
Other supplier products
 |
End-face rotary friction and wear testing machine | Main uses: The end-face rotary friction and wear testing machine is mainly used to evaluate the wear resistance and tribological behavior of mater... |
 |
System of Spinal Pedicle Screw-Rod System Torsional Fatigue Tester | Standard YY/T 0857-2011 (China): Specifies torsional fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, freq... |
 |
Paper water absorption tester | Product Information: Paper water absorption tester, also known as Kleim test instrument, is suitable for the determination of the capillary suctio... |
 |
Ignition Distance Tester for Aerosol Sprays | Product Information: 1. It adopts an embedded processor and the Windows CE operating system. 2. With an 8 - inch liquid - crystal touch screen,... |
 |
Seat Belt Abrasion Tester | Standard： ISO 10555(Seat Belt Assemblies - Test Methods for Abrasion Resistance) ECE R16(Uniform Provisions Concerning the Approval of Safety Bel... |
Same products
 |
Falling Sand Abrasion Test machine | 卖方: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | 卖方: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | 卖方: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | 卖方: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
