Boiler Tubes
Boiler Tubes for SaleDescription
HUASHANG,pipe fittings manufacturers in china, has the cold draw computing device which is 70 meters long, can produce fifty-three meters long for every pipe. With the advanced technological know-how from Korea and Japan, it makes the extra close dimension controls.HUASHANG has developed an exceptional bright annealing process, the heat treatment is performed in a so-called closed furnace. The heat treated substances is covered via an inter gas atmosphere, which guarantees the oxygen cant enter the furnace to contact with the materials, and react to form scale on or tarnish the materials, The surface end is clean, bright and precision even for the tube with greater than 24 meters.
To ensure the quality of each tube from Huashang, all tubes are done 100% PMI test, 100% hydraulic test, 100% inner cleaned by sponge, 100% Dimension test and 100% surface test. Type of tube: atraight tube and u-bend tube/ seamless tube & welded tube.
Boiler Tubes Sizes
OD: 6.35mm--44.5mm
WALL THICKNESS: 0.71mm--3.81mm
Length: MAX 53 meters or as U-BEND tubes
Boiler Tubes Materials
Austenitic Stainless Steel:TP304, TP304L, TP304H, TP304LN, TP316/TP316L, TP316H, TP316Ti, TP316LN, TP321, TP321H, TP317, TP317L, TP347, TP347H, TP310S, TP310H, TP904L, 254Mo.S30432, S31042, N08367
Duplex & Super Duplex Steel:
S31500, S32101, S32003, S32304, S31803, S32205, S32750, S32760
Nickel Alloy Steel:
N06600, N06601, N06625, N07718, N08800, N08825, N10276, N04400, N05500, N02200, N02201, N08028, N08810, N08811, N08020, N10624, N10629, N10675
Boiler Tubes Standard
ASTM A789, ASME SA789, EN10216-5, ASTM B163, ASTM B167, ASME SB163, ASME SB167, ASTM B668, ASME SB668, ASTM A269, ASME SB677, ASTM A213, ASME SA213, ASME SA269, ASMT A270, ASTM B622, ASTM B516Chemical Composition of Nickel Alloy, Duplex steel & Austenitic Steel
| Grade | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Fe | Al | Co | Zr | Nb | Tu | Va |
| Max | Max | Max | Max | Max | Max | Max | Max | Max | Max | |||||||||
| Nickel Alloy | ||||||||||||||||||
| Inconel 600/No6600/2.4816 | 0.15 | 0.5 | 1 | 0.015 | 14-17 | ≧72 | 0.5 | 6.0-10.0 | ||||||||||
| Inconel 600/No6601/2.4851 | 0.1 | 0.5 | 1.5 | 0.015 | 21-25 | 58-63 | 1 | 1.0-1.7 | ||||||||||
| Inconel 690/No6690 | 0.05 | 0.5 | 0.5 | 0.015 | 27-31 | 58 | 0.5 | 7.0-11.0 | ||||||||||
| Inconel 625/No6625/2.4856 | 0.1 | 0.5 | 0.5 | 0.015 | 0.015 | 20-23 | ≧58 | 8.0-10.0 | ≦0.4 | 5 | ≦0.4 | 3.15-4.15 | ||||||
| Inconel 718/No7718/2.4668 | 0.08 | 0.35 | 0.35 | 0.015 | 0.015 | 17-21 | 50-55 | 2.8-3.3 | 0.65-1.15 | 0.006 | 0.3 | Remainder | 0.2-0.8 | 4.75-5.5 | ||||
| Incoloy 800/No8800/1.4876 | 0.1 | 1 | 1.5 | 0.015 | 19-23 | 30-35 | 0.15-0.6 | 0.75 | ≧39.5 | 0.15-0.6 | ||||||||
| Incoloy 800H/No8810/1.4958 | 0.05-0.1 | 1 | 1.5 | 0.015 | 19-23 | 30-35 | 0.6-1.2 | 0.75 | ≧39.5 | 0.15-0.6 | 1 | |||||||
| Incoloy 825/No8825/2.4858 | 0.05 | 0.5 | 1 | 0.03 | 19.5-23.5 | 38-46 | 2.5-3.5 | 1.5-3 | ≧22 | 0.2 | ||||||||
| C-276/No10276/2.4819 | 0.01 | 0.08 | 1 | 0.04 | 0.03 | 14.5-16.5 | Balance | 15.0-17.0 | 4.0-7.0 | 2.5 | 3-4.5 | 0.35 | ||||||
| Monel 400/No4400/2.4360 | 0.3 | 0.5 | 2 | 0.024 | ≧63 | 28-34 | 2.5 | |||||||||||
| Monel K-500/No5500 | 0.18 | 0.5 | 1.5 | 0.01 | 63 | 0.35-0.85 | 27-33 | 2 | 2.3-3.15 | |||||||||
| Alloy 20/No8020/2.4660 | 0.07 | 1 | 2 | 0.045 | 0.035 | 19-21 | 32-38 | 2.0-3.0 | 3.0-4.0 | Balance | 8C-1 | |||||||
| Alloy 28/No8028 | 0.03 | 1 | 2.5 | 0.03 | 0.03 | 26-28 | 30-34 | 3.0-4.0 | 0.6-1.4 | Remainder | ||||||||
| Duplex Steel | ||||||||||||||||||
| S31803/1.4462 | 0.03 | 1 | 2 | 0.03 | 0.02 | 21-23 | 4.5-6.5 | 2.5-3.5 | 0.08-0.2 | |||||||||
| S32205/1.4462 | 0.03 | 1 | 2 | 0.03 | 0.02 | 22-23 | 4.5-6.5 | 3.0-3.5 | 0.14-0.2 | |||||||||
| S32750/1.4410 | 0.03 | 0.8 | 1.2 | 0.035 | 0.02 | 24-26 | 6.0-8.0 | 3.0-3.5 | 0.24-0.32 | 0.5 | ||||||||
| S32760/1.4501 | 0.05 | 1 | 1 | 0.03 | 0.01 | 24-26 | 6.0-8.0 | 3.0-4.0 | 0.2-0.3 | 0.5-1.0 | ||||||||
| Austenitic | ||||||||||||||||||
| 304/1.4301 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18-20 | 8-10.5 | |||||||||||
| 304L/1.4307 | 0.035 | 1 | 2 | 0.045 | 0.03 | 18-20 | 8.0-12.0 | |||||||||||
| 304H/1.4948 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 18-20 | 8.0-11.0 | |||||||||||
| 316/1.4401 | 0.08 | 1 | 2 | 0.045 | 0.03 | 16-18 | 11.0-14.0 | 2.0-3.0 | ||||||||||
| 316L/1.4404 | 0.035 | 1 | 2 | 0.045 | 0.03 | 16-18 | 10.0-14.0 | 2.0-3.0 | ||||||||||
| 316H/1.4919 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 16-18 | 10.0-14.0 | 2.0-3.0 | 0.1 | |||||||||
| 316Ti/1.4571 | 0.08 | 1 | 2 | 0.045 | 0.03 | 16-18 | 10.0-14.0 | 2.0-3.0 | 0.7>5x(C+N) | |||||||||
| 321/1.4541 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17-19 | 9.0-12.0 | 0.7>5x(C+N) | ||||||||||
| 321H/1.4878 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 17-19 | 9.0-12.0 | H | ||||||||||
| 317/1.4449 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18-20 | 11.0-14.0 | 3.0-4.0 | ||||||||||
| 317L/1.4438 | 0.035 | 1 | 2 | 0.045 | 0.03 | 18-20 | 11.0-15.0 | 3.0-4.0 | ||||||||||
| 347/1.4550 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17-19 | 9.0-12.0 | |||||||||||
| 347H/1.4912 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 17-19 | 9.0-13.0 | |||||||||||
| 310S/1.4845 | 0.08 | 1 | 2 | 0.045 | 0.03 | 24-26 | 19.0-22.0 | 0.11 | ||||||||||
| 310H/1.4845 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 24-26 | 19.0-22.0 | |||||||||||
| N08904(904L)/1.4539 | 0.02 | 1 | 2 | 0.045 | 0.03 | 19-23 | 23.0-28.0 | 4.0-5.0 | 0.1 | 1.0-2.0 | ||||||||
| S31254(254Mo)/1.4547 | 0.02 | 0.8 | 1 | 0.03 | 0.01 | 19.5-20.5 | 17.5-18.5 | 6.0-6.5 | 0.18-0.22 | 0.5-1.0 | ||||||||
Boiler Tubes Specification/Technical Data
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Weld Neck Flanges | Similar Products Product description WELDING NECK RISE FACE FLANGE（WNRF） Stainless steel weld neck flangeare popularly used in excessive stres... |
|
|
Concentric Reducer | we are suppliers, manufactures, and exporters of concentric reducers, a type of pipe reducer that fastens pipe sections on the same axis and is con... |
 |
Socket Weld Flanges | Product description Reducing socket weld flangeis a flange with one end welded with steel tube and the other end connected with bolts. It is suita... |
 |
180 Degree Elbow | Product description The connection form of stainless steel 180 degree steel pipe elbowis butt welding elbow and steel pipe directly. According to i... |
 |
Long Neck Flanges | Similar Products Socket Weld Flanges Socket weld flanges are counter-bored to receive the pipe earlier than being fillet welded. Threaded Flanges B... |
Похожие товары
 |
Insulated Copper Tube | Продавец: Ningbo Jintian Copper (Group) Co., Ltd., | Insulated Copper Tube As a big and responsible copper pipe insulation manufacturer, we produced ... |
 |
EAM12 Earpiece with on-MIC PTT & VOX& Transparent Acoustic Tube | Продавец: Hytera Communications Corporation Limited | Specifications of EAM12 Specs_Acc_Audio Weight about 32g Color black PTT Key available VOX su... |
|
|
Boiler Tubes | Продавец: WENZHOU HUASHANG STEEL CO.,LTD | Boiler Tubes for SaleDescription HUASHANG,pipe fittings manufacturers in china, has the cold dra... |
|
|
Tube Caps | Продавец: WENZHOU HUASHANG STEEL CO.,LTD | Tube cap ,also known as end cap, plug, cap, pipe cap, stuffy head, welded in the end of the pipe ... |
|
|
Precision Tubes | Продавец: WENZHOU HUASHANG STEEL CO.,LTD | Precision Tubes Description The traditional annealing approach is performed in a so referred to ... |
